Used/Vintage Bikes and Components.

Last updated 02/07/12

Steven Willis
1778 East Second Street
Scotch Plains, NJ. 07076
908-322-3330 Please only use email until you are ready to pay for it.
info.tbs@verizon.net

Complete Bikes.

1. Used-Bob Jackson tandem. Rattle can ugly green on a 23" x 22" center to top with 22" x 22" top tube. The key to this bike is the parts Campagnolo cross over drive cranks, NR tab pedals with the dust caps, Brakes and brake levers, headset, rear rally derailleur and two 27.2 seatpost. Older Cinelli handle bars and captain's stem and to top it off it has older Phil hubs and bottom brackets. The best of everything on a cool but beat frame. If you look carefully at the pictures you will see patches Tom Kellogg put on the bottom of the seat tubes to cover the rust through holes there. My guess would be time to replace the seat tubes before you use it or ride it very carefully at your risk. I am selling this for the owner who just bought a brand new Spectrum tandem from Tom with all new stuff. Yes he just wanted a rider not a collectable one. The owner says he has the rear disk I believe a Phil and he lost one of the lower seat post cradles that he will look for. So given all that he is asking for a price of 1999.99.pictures
2. Used-Benotto (it will be at the Trexler Town swap meet at Oct 1st.) champagne 61 cm center to center and 63 cm center to top of seat tube, with a 57.5 top tube. Full Columbus frame with Benotto drop outs. The fun part with this vintage bike is the Gipiemme, pronounced GPM, group. Not found very often but a good working well made parts. The Gipiemme 172.5 cranks, brakes, pedals, and derailleurs all look and work great. The hubs and rims are Campagnolo. The bars, 64-42, and stem, 12 cm, are Cinelli. This bike looks to have low miles but I do not know the history of it. Priced to sell at 999.99.pictures
3. Used-Cilo bright red 50 cm center to center and 52 cm center to top of seat tube, with a 53 top tube. Full Columbus SLX frame with a, I believe first generation Shimano Dura Ace 6 speed index down tube shifters. This bike has about 50 miles on it. This bike has been sitting in someone's basement for it's whole life until it was traded in. Priced to sell at 899.99.pictures
4. Used-Cycles Gitane 50 cm center to center and 51.5 center to top seat tube with a 53 cm top tube. A nice condition real French bike near the end of the run for the French bikes too. All the parts are labeled Spidel. The story is, as I know it, they saw that the Groups from Campy, Suntour and Shimano were taking over so the French thought they would do a group. The crank and headset are by Stronglight. The derailleurs and seatpost is by Simplex. The brakes look like Mafac to me and the pedals and hubs are by Millard. All of them are labeled Spidel. The frame is made with Super Vitus steel tubing all covered in a Gitane blue. A few chips here and there but a straight and true piece of history. It is on sale for 799.99.pictures
5. NOS-Gios Torino 53cm center to center seat tube with a 53 top tube too. Beautiful white with a blue panel on the seat tube and down tube. Leather stitched to a Cinelli 66x40 cm handle bars. Dated 1985 fluted 170 mm cranks non dated rear derailleur. This is the Super Record reduced group so the bottom bracket is NR and the pedals are the SL not the titanium ones. This bike was put together back in about 1985 and has never been ridden. Never even glued on the tires. So this is a brand new Campagnolo Super Record Gios Torino bike. 2799.99.pictures
6. Used-Johnny Coast built under the Velo Orange name. It is 21" center to center and it will Tange headset, aluminum fenders and Paul brakes. This is a frame Johnny Built for himself and Matt Ballman was tired of waiting for his custom frame to be made so he took this one. He said it is one of the best riding bikes he has ever own but just time to clear a few out to make room for more. He was told it is made from dedacciai steel and Henry James lugs. It rides like a long happy dream. Matt is asking 999.99 for it.pictures
7. Used-Mercian Cycles full Reynolds 853 frame 61 center to top, 59 center to center with a 57 top tube. This bronze colored road bike is set up with new spacing 130 mm rear and 100 mm front and built up wit a sweet mix of parts from Shimano Ultegra triple crank and rear derailleur with a Campy front, to a Thomson seat post, Cinelli 41 center to center bars and a Salsa stem. The wheels are Neuvation M28 Aero X with Canti gatorskins tires. The shifting is by thumb shifters mounted by the stem. What is so nice about this ornate lug work bike is the look and feel of an old classic frame with all the modern parts. Best of both worlds. This almost like new bike is now only 2499.99. pictures
8. Used-Motobecane Jublee Sport 52 cm center to top 53.5 center to center seat tube with a 55 cm top tube. This bright yellow French bike is just about as new as you can get. I would guess there is less then 50 miles on this bike almost like it was put in a time capsule. This is set up with a mixture of early Japanese and French parts. The derailleurs are Suntour Blue Line and the seat post, bar, stem and crank are French. It has 27 inch wheels and a very quirky seat post. The tubing is Columbus Gamma. It is on sale for 499.99.pictures
9. Used-Schwinn bright red Delux American. An old American made cruiser in really good non restored shape. The chrome looks great even has the original tires. Has a front suspension the old kind, a fake gas tank with a non working horn, Bendex red band brake too and all this can be yours for only 499.99. pictures
10. Used-Schwinn Light weight Racer mens black all cleaned up and ready to go 1970 two speed kick back Bendex rear hub. Just for you new guys this is light weight by old Schwinn people it is an up right heavy steel frame way cool bike that looks cool 149.99pictures
11. Used-Schwinn JR Sting Ray. This was left at my door the other day by my friend Dan and he nor I really know these Schwinn bikes very well. Ray says the fork is not original The seat looks good as does the grips. I do not think the sissy bar was ever that tall from Schwinn but I do not know. I will be a fun project bike for some one and if it does not sell that may be me. Anyway as is and have fun with this cheep StingRay at only 199.99.

Road Frames.

1. NOS-3Rensho 54 cm center to top and 52 center to center seat tube with a 53 cm top tube. Yes it has never been built up, never ridden, not a repaint just as he made it and yes it is now available to buy. As a lot of people know this has been in my shop for many years and the owner would not sell it at last he came in and asked why it is still here. So after I told him he turned down 2500 for it he said put it up and sell it for me. It has a NOS Shimano Dura-Ace headset installed and I found a set of light blue 3Rensho toe straps and a Shimano NOS track spindle now off to find some cups too. So here it is for 1999.99.pictures
2. NOS-Basso Gap 53 cm center to center seat tube with 54 cm top tube. Red with Basso Tube Concept tubing. What can I say a fast bright red Italian frame. Price 499.99.pictures
3. NOS-Bianchi 55 cm center to center seat tube with a 55 cm top tube. White road frame made in Italy. If you would like a traditional Italian road frame with an alloy Stronglight 1 inch headset frame to build up here is one to look at. It is new never built up just been hanging around the shop a bit. Very is pretty clean given it’s age just some small scratches. Some of the highlights are braze on shift lever mounts, two water bottle mounts, chain hanger, and made with Superset 2 Bianchi Exclusive tubing and a price of only 399.99.pictures
4. NOS-Eclipse 56 cm center to center seat tube with a 56 cm top tube. Black and yellow road frame made in Canada. If you would like something different that no one else sees very often I may have a fun frame for you. It is new never built up just been banged around the shop a bit. So little paint chips but no dents or rust. Some of the highlights are, vertical drop outs, fast back seat stays, internal full sloping fork crown, and a way cool aero down tube that I tried to get to show up in the pictures. It has a 1 inch threaded fork with British threads and a price of only 499.99.pictures
5. Used-Falcon Olympic early 70's Reynolds 531 frame 58 center to top 57 center to center with a 57 top tube. This white in need of a paint job frame is 120 mm rear and what looks like 95 mm front spacing has horizontal stamp steel drop outs. Would make a cool fix gear bike only 99.99. pictures
6. NOS-Frank Chamberlain 52 cm center to center burgandy with 55 cm top tube Campagnolo Record headset one of the best all time frame builders last frames he ever made before he went out to live out in Alaska. I ride the last one made. Breathtakingly beautiful lugless frame. Price 1099.99.pictures
7. NOS-Fuji titanium decal set, I know it is not a frame but I am guessing this is a good spot to list it. Price of 29.99.pictures
8. NOS-Cinelli bright blue Aliante Team aluminum frame 50cm center to center and 52cm top tube with Cro-Mo fork sweet dark blue with yellow decales. Originally this 1999 baby was 999.99 now SALE PRICE 599.99 just this one left. pictures
9. Used-Claud Butler New Allrounder model large English made frame 25" center to center, with a 23" top tube. This very rare original red colored, I was told 1954 all Reynolds 531 straight gauge, road bike is set up 120 mm rear and 100 mm front and has a headset to go with it. The frame needs a 26.6 seat post and is made for a single right side down tube shifter with the braze-on light mount on the fork. The original Butler went belly up in '57, so this is one of the last "real" Claude Butlers. Great ornate lug work on this straight rust free frame and you can own it for only 499.99. pictures
10. Used-Colnago light blue painted by Joe Bell and never ridden since the new paint was put on but was built up. 54 cm center to center and 55.5 cm center to top of seat tube, with a 54 top tube. Full Columbus frame with Campagnolo Super Record headset and drop outs. If it sells I may be talked out of a Colnago jersey. The frame was gotten in a trade he kept all the parts. Priced at 999.99.pictures
11. NOS-Desmarais Special 55 cm center to center seat tube with 55 cm top tube 126 mm rear and of course 100 mm front. Pearl white Italian made Reynolds 531 bike frame and fork that has some shop wear like little chips and scratchs and was partly built up but never finished the build up. It takes one water bottle has a braze on front derailleur and a 27.0 seat post. It also has Campagnolo drop outs and a Cinelli bottom bracket shell. I will toss in the Ritchey headset and the Ofmega bottom braket if you want. I think it was made in 1984 but that is just a guess. Priced at a sweet 499.99. pictures
12. Used-Guerciotti 51cm center to center seat tube with a 53cm top tube. Full Columbus tubing I would guess SL a ratty red paint job Campy short drop outs. 126 mm rear with 100 mm front. It will need a 27.2 post and I am tossing in the Campy headset. Remember this is Italian threads! I can find no dents and very little rust, just some spots on the drop outs and bb shell. It looks like the owner put his SS number in the down tube. It could use a nice paint job so I am offering it up cheap at 299.99.pictures
13. NOS-Holdsworth made in England road frame 55 cm center to center and 57 cm center to top seat tube with a 57 cm top tube black paint job never built up new old stock full Reynolds 531 butted frame and fork. Campanolo drop outs, fork is 100 mm front and 126 mm rear on this very simple lug work frame. Comes with a Tange heast set, one water bottle braze on, three top tube guides and down tube bosses and all for only 499.99. pictures
14. NOS-Ochsner made in Switzerland road frame 54 cm center to center and 56cm center to top seat tube with a 55 cm top tube bright red paint job never built up new old stock. Campanolo drop outs, fork is 100 mm front and 126 mm rear on this very simple lug work frame. French made Stronglight alloy head set, Italian threaded, one water bottle braze on, three top tube guides, down tube bosses, and front derailleur braze on too and all for only 699.99. pictures
15. Used-Peckham Frank Peckham was a Grumman aircraft engineer who was a club cyclist living and working on Long Island. In the late 70's, knowing that he possessed the skills and tools, he decided to try his hand at frame building. His work was so nice that his fellow riders began to ask for his work. Over the following 20 plus year period he built exactly 197 frames. He always worked with the highest quality materials, demonstrating exceptional skills of fit and finish. He even did his own paint work using, as I understand it, an Imron two part system. His aim was to build the very best custom bicycle in all cases. This 53 center to top 52 center to center with a 56 top tube blue Columbus tubing bike with Campagnolo drop outs with 126 mm rear spacing frame with Dura-Ace headset is in need of a proper paint job but other then that it is clean and straight and only 399.99. pictures
16. Used-RIH made in Holland track frame 54 cm center to center and 56cm center to top seat tube with a 56 cm top tube pearl white and royal blue cycle art paint job never built up after it was repainted. Sweet twin plate fork crown 100 mm front and 120 mm rear on this very pretty lug work and all for only 499.99. pictures
17. NOS-Somec Air 52 cm center to center with a 54 cm top tube. It is white with blue decales Very Rare. A great hand made frame from Italy Price 649.99. pictures
18. Used-Woodrup Giro-Touring ice blue full Reynolds 531 frame 62 center to top, 60 center to center with a 57 top tube. This ice blue long Campy dropouts frame with 122 mm rear and 100 mm front is in very good shape with the Campagnolo Nuovo Record headset that still feels great. The lug work is so smooth and clean this is one of the cleaner ones I have seen. Could even be made into a fix gear bike only 399.99. pictures

Groups.

1. Used-Dura Ace silver short group. Crank 172.5 39x52, front, clamp on 1 1/8", and rear derailleurs with a clamp on 1 1/8" friction shifters, brakes nutted and looks like new levers and two cable clamps. A lot of this stuff looks almost new. Look at the pictures and see what you think. Priced at 499.99.pictures

Wheels

1. NOS-Campagnolo NR 100 mm front low flange hub with the QR laced to a Nisi 36 hole silver tubular rim with 14 ga spokes. Okay this is a strange one. I had two of the NOS front wheels which seems silly so I took one apart and put the NOS Nisi rim with the front wheel so you could make up a set with a rear hub. Priced at only 99.99 picture
2. NOS-Campagnolo NR 28 hole high flange front hub laced to a Nisi tubular 700 c rim. This 3 cross 15 ga stainless spokes wheel looks to be NOS with out the QR's and has a lot of shop wear and tear only, well at least sitting in the basement for loads of years. Priced at only 79.99 picture
3. Used-Campagnolo GS 36 hole 100 mm front 126 mm rear hubs laced 3 cross with 14 ga spokes to Super Champion Gentleman 700 rims has the wrong QR's, they are Spidel, needs to be cleaned up but still would look great on your classic bike. Priced at only 59.99 picture
4. Used-Campagnolo GS 36 hole hubs laced Nisi Countach tubular rims 700 c rims. These Italian threaded wheel set has a 126 mm rear with a 100 mm front The rear hub feel good but the front feel ruff and no QR's. Priced at only 49.99 picture
5. Used-Campagnolo NR British threaded curve QR 32 hole 100 mm front 126 mm rear hubs laced 3 cross with 15 ga DT spokes to Araya Aero 1 700 tubular rims these are in good shape and very true. Priced at only 129.99 picture
6. Used-Campagnolo NR older Italian flat QR 36 hole 100 mm front hub laced 3 cross with 14 ga spokes to a Rigida 27x1 1/4 alloy rim and needs to be cleaned up, and repacked. Priced at only 59.99 picture
7. Used-Campagnolo NR older Italian threaded flat QR 36 hole 100 mm front 126 mm rear hubs laced 3 cross with 15 ga DT spokes to some unknow 700 tubular rims and needs to be cleaned up, like rust on the ferrules and the QR's. There is a small dent in the rear wheel not bad but it can be seen. Priced at only 99.99 picture
8. Used-Campagnolo NR low flange 100 mm front and 126 mm rear with out QR's and Super Champion Arc-en-ciel 36 hole tubular rims with a British threaded Regina 13-15-17-19-21-23 6 speed Oro freewheel. This Double butted spoke wheel looks to be in great shape just missing the QR's. Priced at only 149.99 picture
9. Used-Campagnolo NR 36 hole hubs laced to unknown brand solution harden clincher 700 c rims. These British threaded wheel set has a 120 mm rear with a 100 mm front The hubs feel as Campy does and it even has the QR's and a Atom 5 speed 14-16-18-21-24 freewheel. It all looks great feels great and is all ready to go. Priced at only 149.99 picture
10. Used-Campagnolo NR 32 hole hubs laced to Nisi Countach tubular 700 c rims. These Italian threaded wheel set has a 126 mm rear with a 100 mm front These hubs feel perfect and looks to have almost no miles and you also get a almost new Regina Oro 14-16-18-20-22-24. Priced at only 199.99 picture
11. Used-Galli Maillard 100 mm front and 126 mm rear hubs are laced to Galli Servizio Corse 32 hole hard ano tubular rims. These three cross DT 14 ga spoke wheels are 100 mm front and 126 mm rear on French made British threaded hubs with the original Galli QR's. They also have a Shimano 600 13-15-17-19-21-24 and it could almost pass for new. Priced at only 199.99 picture
12. Used-Hi-E 36 hole front hub laced one cross to a Sun Mistral hard ano 700 c clincher rim. This light weight no QR American made hub and rim is so cool but I can never figure out the one cross part. Priced at only 59.99 picture
13. Used-Maillard Sealed Mechanism British threaded 125.5 mm with out the QR 36 hole rear hub laced 3 cross with 14 ga spokes to a Rigida 27x1 1/4 alloy rim and needs to be cleaned up, and repacked. It looks like it should be 122 mm and some one added an extra lock nut to the freewheel side. Priced at only 39.99 picture
14. Used-Maillard Sachs British threaded 36 hole 100 mm front 126 mm rear hubs laced 3 cross with 14 ga spokes to Alesa 700 clincher rims has the QR's and needs to be cleaned up, like rust on the ferrules and some scratches on the rims. The hubs were repacked and spin nice and would look great on your classic bike. Priced at only 59.99 picture
15. Used-Normandy high flange 100 mm front and 120 mm rear with QR's and steel Rigida 36 hole rims. These French threaded hubs are in need a a repack and the rims could use some polish. They are cheap because they need some work but if your UO8 needs wheels these may be what y6ou need. Priced at only 19.99 picture
16. Used-Normandy 100 mm front high flange hub with the correct QR laced to a Weinmann 27 1 1/4 alloy rim. Will need some repacking and some cleaning small scrapes on the rim but very ride-able . Priced at only 39.99 picture
17. Used-Normandy Luxe Competition 100 mm front high flange hub with the really old Simplex QR laced to a Mavic Championnat Du Monde 700 tubular rim. Will need some repacking and some cleaning too. Priced at only 89.99 picture
18. Used-Performance 32 hole sealed bearing hubs laced to Mavic MA 40 rims that could almost pass for new. Has a Shimano 600 13-14-15-17-19-21 6 speed freewheel. Looks like the hubs was made by Suntour but I am only guessing. Priced at only 99.99 picture
19. Roval 700c tubular wheel set. 18 aero spoke radial laced front and 24 aero spoke radial laced non drive and one cross drive side. If you know your wheels these were one if not the first true factory wheel set. Mavic was one of the first but these were before the Mavic Helium wheels. Comes with used Vittoria Corsa CG tubular tires, more show then go any more. Does not have any QR's or freewheel with it. Oh and did I say they are in very good shape. They are priced at 299.99. pictures
20. Used-Shimano 600 32 hole 7 speed 12-13-14-15-17-19-21tooth cassette 126 mm with the QR laced to a Mavic GL 330 with 14 ga DT spokes it even has a tubular that holds air on it. Yes it was my wheel that I used to climb these hills around here with a 21. Priced at only 89.99 picture
21. Used-Shimano Dura Ace 32 hole front hub 100 mm no QR super clean hub laced to a Mavic GL 330 tubular with wheelsmith stainless steel 15 ga spokes. Priced at only 59.99 picture
22. Used-Shimano Dura Ace 32 hole 7 speed cassette 126 mm rear and a 100 mm front no QR's super clean hubs laced to Araya Aero 4 Super Hard Anodized tubulars with DT stainless steel 14/15 ga spokes. Priced at only 149.99 picture
23. NOS-Specialized low flange front hub 28 hole with QR laced to a Araya Aero 1 hard ano tubular 700 c rim with 15 gar aero wheelsmith stainless steel spokes. This is a new never rode or glued up front wheel. Price of only 59.99 picture
24. Used-Spinergy Rev-X Specialized titanium QR's 100 mm front 130 mm rear hubs, 700 tubular rims these are in good shape and very true it takes Shimano or SRAM cassettes from 8 to 10 speed. Priced at only 299.99 picture
25. Used-Sunshine high flange front hub 36 hole no QR laced to a Ukai filed tubular 700 c rim. Looks and feels great on the hard to find hub and the rim has a core of plastic in it to support the rim. Way cool. Price of only 49.99 picture
26. Used-Suntour Superbe Pro 32 hole low flange 120 mm rear hubs with out QR laced to Araya Aero 1 super hard anodized tubular rim. Nice shape and not so easy to find hub. Priced at only 49.99 picture

Rims

1. NOS-Ambrosio 27 inch 23 mm wide 36 hole clincher rim. Priced at only 39.99 picture
2. Used-Ambrosio 27 inch 36 hole clincher rim. Priced at only 9.99 picture
3. Used-Ambrosio Montreal 36 hole tubular rim. Priced at only 9.99 picture
4. NOS-Araya Aero 1 world Champion 700c 32 hole rim. Priced at only 29.99 picture
5. Used-Araya 27 inch 36 hole clincher rim. Priced at only 19.99 picture
6. Used-Araya Red Super Hard Anodized 32 hole tubular rim. Priced at only 9.99 picture
7. Used-Campagnolo Victory Strada 700c 36 hole tubular rims. Priced at only 19.99 picture
8. Used-Fiamme Red label 36 hole tubular rim. Priced at only 9.99 picture
9. Used-Fiamme yellow label 27 inch 36 hole clincher rims. Priced at only 19.99 picture
10. Used-French silver 36 hole tubular rim. Priced at only 9.99 picture
11. Used-Matrix Iso 32 hole tubular rim and made in the USA. Priced at only 9.99 picture
12. Used-Mavic GL330 700c 36 hole tubular rim. Priced at only 9.99 picture
13. Used-Mavic GP 4 36 hole tubular rim. Priced at only 9.99 picture
14. Used-Mavic MA40 32 hole clincher rim. Priced at only 9.99 picture
15. Used-Mavic Mach 2 CD 36 hole tubular rim. Priced at only 9.99 picture
16. Used-Mavic Reflex 700c 32 hole tubular rim lots of glue. Priced at only 9.99 picture
17. Used-Nisi Sludi36 hole tubular rim. Priced at only 9.99 picture
18. Used-Prestigio Internacional 2001 Profesional Argentina 700c 36 hole tubular rim. Priced at only 9.99 picture
19. Used-Regida AL 1320 27 inch 36 hole rim. Priced at only 9.99 picture
20. Used-Regida 27x1 1/4 inch 36 hole clincher rim. Priced at only 9.99 picture
21. NOS-Regida chrome steel 26x1 3/8 inch 40 hole clincher rim. Priced at only 19.99 picture
22. NOS-Saavedra Turbo Aero 28 hole tubular 26 inch rims made in the Argenina. Priced at only 59.99 picture
23. NOS-Saturn HC 19 27 inch 32 hole clincher rim. Priced at only 29.99 picture
24. Used-Super Champion Competition 36 hole tubular rim. Priced at only 9.99 picture
25. Used-Super Champion 27 inch 36 hole rim. Priced at only 9.99 picture
26. NOS-Weinmann 27 inch 36 hole clincher rim made in the USA. Priced at only 19.99 picture
27. Used-Wienmann concave 20 mm wide 36 hole clincher rim. Priced at only 9.99 picture
28. Used-Wolber Modele 58 700c 36 hole clincher rim. Priced at only 9.99 picture

American.

1. Used-Arnold Industries stem bolt. If my memory serves me right that was the name of this company that made light weight parts for Campagnolo and Cinelli this is for the Cinelli stem looks almost new very light and hard to find. Priced at 19.99. picture
2. Used-Arnold Industries stem bolt. If my memory serves me right that was the name of this company that made light weight parts for Campagnolo and Cinelli this is for the Cinelli stem looks okay very light and hard to find. Priced at 9.99. picture
3. Used-ControlTech seatpost 27.0x270 mm long probably cut down from 350 mm and as you can guess not a lot of scratches up high. Priced at only 39.99.picture
4. Used-ControlTech 130 mm, 22.2 quill, 73 degree, American made very light road stem with a 26.0 clamp size. Nice and clean but missing the original top rubber plug so I put a handlebar end plug in. Price of only 29.99. picture
5. Used-ControlTech 130 mm, 1" threadless, 73 degree, American made very light road stem with a 26.0 clamp size. Nice and clean with the added bonus of the two rear bolts are titanium. Price of only 29.99. picture
6. NOS-ControlTech 135 mm, 25.4 quill, 90 degree, American made very light road/mountain stem with a 25.4 clamp size. Price of only 29.99. picture
7. Used-Dean 150 mm, 1" quill, 90 degree, American made very light road stem with a 25.8 clamp size. Price of only 29.99. picture
8. NOS-HED Aero triathlon water bottle. It fits between the two forward tri bars. It also has the foam filler hole that helps filter out the water you would pour in it. It is still in the sealed bag so sorry about the picture. It is priced at 19.99 picture
9. Used-New Departure hubs front and rear 36 holes with a threaded driver. I was told the front was a New Departure but for the life of me I can find no name. Priced at 29.99. picture
10. Used-New Departure WL 36h front hub with nuts. Looks good feels good too a little rust. Priced at only 14.99 picture
11. Used-Ritchey WCS threadless stem 1 1/8" 100 mm long 26.0 clamp to bar size. Very light at 130 grams flip flop. Nice shape no bad marks at all and yes I know it is not really vintage but what else should I do with it. Price of 19.99.picture
12. Used-Rocket BMX/track/Fixie 44 tooth 130-110 mm bolt circle 1/2 x 1/8 inch alloy ring. Yes it fits both 130 or 110 bolt circle cranks. Priced at 9.99 picture
13. Used-Ross mountain bike stem. Alloy top reach part in blue with the built in front brake cable hanger and a Cro-Mo quill in get this a 21.1 mm great shape hard to find stem. Priced at 19.99picture
14. Used-Salsa track stem 110x22.2x26.0 cro-mo clean and straight. Priced at 29.99. picture
15. Used-SCOR pedal adapters that move the pedals out about 2 cm in perfect shape I use them to see if the pedals or cranks on this page are British threads or not. Priced at 19.99. picture
16. Used-Schwinn low flange Script front hub 36 hole bolt on . Price of only 9.99 picture
17. Used-SRP titanium cogs. A bunch of American made SRP titanium cogs that fit Shimano splind free-hub bodys. They fit the newer body and the older ones too. They look good but with out building it up and trying it out there is not way to figure how worn out the cogs are. So these are sold as is Priced at 39.99. picture

Belgium.

1. Used-Weinmann concave 700"x36 hole rim 22.5 mm wide. Used and lots of oxidation on it but straight and true. Priced at a low price of 19.99 each

British stuff.

1. NOS-Brooks Swift honey with titanium rails with copper rivets new in the box 299.99.
2. NOS-Brooks B72 black four black rails with clamp Proofide bag and cloth to put on the Proofide. New in the box 99.99.
3. Used-English Brake set one lever and one caliper no center bolt for drop bars. Priced at 19.99 picture
4. Used-English made 4 wire seat clamp. I know it is no big deal but I get people that ask for these and I never seem to have them. Only 4.99.picture
5. NOS-English made 2 wire seat clamp. Another no big one but if you want the real deal here is is. Priced at 9.99.picture
6. Used-English steel brake parts. You know the ones that came on all those old 3 speeds. You get every thing in the picture for a low price of 9.99.picture
7. Used-English auto adjust left lever but missing that spring inside. Priced at 9.99.picture
8. Used-GB Arret dropped bar lever in pretty good shap. Priced at 39.99.picture
9. Used-Raleigh British threads 1.37x24 bb cottered axle with the used cotters on has the red R 139.7 mm long no pits but not all that perfect either. It is priced at 9.99. picture
10. Used-Raleigh seatpost binder bolt. You know the ones that you all ways pop the little red R out of when you over tighten the bolt. Price of 9.99.pictures
11. Used-Raleigh hub front 36 hole low flange 94 mm alloy Sugino wing nuts. Priced at 19.99picture
12. Used- Sturmey Archer 36 hole front and rear hub set. The front is a dyno and the rear is a 3 speed dated 1974 has both lights and was working when I took it apart but is being sold as is. Priced at 59.99. picture
13. NOS-Sturmey Archer AW dated 1971 no nuts or indacater chain but brand new 36 hole hub. priced to sell at 29.99.
14. Alloy Fenders I am guessing on the made in England. Someone told me they were but they have no name and look pretty good but as we all know they will not keep any water off of you. Priced at 9.99.picture

Canada

1. Used-Syncros 110 mm 26.0 1 inch quill the older Canadian made one. Very clean and light. Priced at 39.99.picture

Campagnolo Components.

Bottom Brackets

Complete

1. NOS-Campagnolo French threaded Record bottom bracket. Alloy cups and 111 mm steel spindle. The plastic sleeve is missing the smaller part. Price 99.99.picture picture
2. Used-Campagnolo Triomphe Italian threaded bottom bracket it is dirty that I cleaned off after the picture to check out the races and it all looks great. 115 mm axle and these work great with NR and SR too. Price of 39.99.picture

Cups

1. NOS-Campagnolo British threaded thin wall adjustable cup with a used Campy lock ring. Price of only 19.99. picture
2. Used-Campagnolo three British threaded thin wall fixed cups nice shape. Price of only 9.99 each. picture
3. Used-Campagnolo NR two British threaded thick wall with groves fixed cups nice shape. Price of only 9.99 each. picture
4. Used-Campagnolo NR four Italian threaded thick wall with groves adjustable cups no lock ring nice shape. Price of only 9.99 each. picture
5. Used-Campagnolo C-Record French threaded thick wall alloy with groves adjustable cups no lock ring nice shape inside ruff out side. Price of only 19.99 each. picture
6. Used-Campagnolo NR British threaded thick wall with groves bottom bracket nice shape 114.4 mm long marked 68-SS. Price of only 49.99. picture
7. Used-Campagnolo Italian threaded fixed cup. Great shape no pits no rust so please do not ask that. It is priced at 19.99. picture

Spindles

1. Used-Campagnolo 68-SS-120 Z spindle with the bolts and washers. It is 111 mm long with 50 mm between the bearing races. Price of only 19.99.picture
2. Used-Campagnolo 70-SS-120 spindle 113 mm with 56 mm between the bearing races. Price of only 19.99.picture

Bolts

1. Used-Campagnolo NR/SR crank bolts I have two kinds Black or Silver the chrome are all gone now. I may or may not have a washer for it if I do I will send it too if I don't I will not. Price of only 9.99 each.picture

Brakes

1. Used-Campagnolo top tube cable guides with the screws. Not perfect a little rust but the screws work and look good. 14.99.picture
2. Used-Campagnolo top tube cable guides with out the screws. A little more rust and cheaper but you get them to work. 8.99.picture
3. Used-Campagnolo brake shoes with guides. One set could be Chorus could be Victory could be another one but is marked Campagnolo, you figure it out. Price of only 19.99.picture
4. Used-Campagnolo Chorus brake calipers double front with single rear just about perfect. Price of only 149.99.picture
5. Used-Campagnolo Delta Croce D'aune brake set with levers and hoods yes it is all there and works great. Priced at 329.99. picture
6. Used-Campagnolo Record Delta brakes levers scratched up lever blade and a small piece broken out of the body under the hood but still works great. Needs some cleaning. Price of only 79.99.picture
7. NOS-Campagnolo NR/SR brake lever strap. Priced at 19.99 picture
8. Used-Campagnolo Nuovo Record brake lever missing the pull up nut and clamp and has an A'ME hood scratched up but very usable. Price of only 19.99.picture
9. Used-Campagnolo Nuovo Record brake lever missing the pull up nut and clamp and hood scratched up but very usable. Price of only 19.99.picture
10. Used-Campagnolo Nuovo Record brake lever all there but is scratched up and the hood is shot. Price of only 19.99.picture
11. Used-Campagnolo Nuovo Record brake lever blade scratched up but very usable. Price of only 4.99.picture
12. Used-Campagnolo Nuovo Record brake lever set pretty clean some small scratches but no cracks and no hoods. Priced at 39.99.picture
13. Used-Campagnolo Nuovo Record brake lever missing the clamp and nut and the barrel that holds the cable a little scratched up but very usable. Price of only 19.99.picture
14. NOS-Campagnolo NR/SR brake QR thingie! I have just one left and that is it. Price of only 19.99.picture
15. NOS-Campagnolo NR/SR brake center bolt. This is the medium one 26 mm on the arm side and 28 mm on the back side it is marked "Campy" it is made for the rear with the "10 mm nut" type mount or the front with the "allen" bolt type mount.19.99.picture
16. NOS-Campagnolo NR/SR brake center bolt. This is the short one 26 mm on the arm side and 14 mm on the back side not marked "Campy" it is made for the rear with the "allen" bolt type mount.19.99.picture
17. Used-Campagnolo NR/SR brake spring for the short reach brake.Price of only 9.99.picture
18. Used-Campagnolo NR/SR clamp with nut the part that always seems to go missing. Price of only 12.99.picture
19. Used-Campagnolo NR/SR short reach brake arm clean and not bent with the domed QR. Price of only 19.99.picture
20. Used-Campagnolo NR/SR short reach brake arm clean and not bent. Price of only 19.99.picture
21. Used-Campagnolo early GS brake lever missing the pull up nut and clamp and the hood scratched up but very usable. Price of only 19.99.picture
22. Used-Campagnolo Aero brake levers mostly there and in ok nice shape some scratches but missing a clamp and the nut for one of the levers and last the little piece that the cable rides on that you must have to get these to work. I do not know the model of these aerodynamic brake levers. Price of only 29.99.picture
23. Used-Campagnolo Aero brake levers mostly there and in ok nice shape some scratches but missing the hoods and the little piece that the cable rides on that you must have to get these to work. I do not know the model of these aerodynamic brake levers. Price of only 29.99.picture
24. Used-Campagnolo Aero brake levers in good nice shape with plastic bodies some light scratches but missing the hoods and clamps and the little piece that the cable rides on that you must have to get these to work. I do not know the model of these aerodynamic brake levers. Price of only 29.99.picture
25. Used-Campagnolo Aero brake lever in good nice shape with everything some light scratches and dirty hood. I do not know the model of this aerodynamic brake lever. Price of only 19.99.picture
26. Used-Campagnolo Aero brake lever Missing the clamp and nut. A little scratched up but other then that nice. I do not know what model it is but the body is alloy. Price of only 29.99.picture
27. NOS-Campagnolo Aero brake lever hood white. I do not know the model of this aerodynamic brake lever hood. Price of only 19.99.picture
28. NOS-Campagnolo Aero brake lever hood black. I do not know the model of this aerodynamic brake lever hood. Price of only 19.99.picture
29. NOS-Campagnolo Victory brake lever hood white. Very dirty but maybe you can clean it up. Price of only 9.99.picture
30. Used-Campagnolo Victory brake lever set. One is pretty clean one is. Priced at 39.99.picture
31. Used-Campagnolo Veloce brake calipers in very clean shape even the pads look good and the chrome is good too. Price of 49.99.picture

Chain Rings

1. NOS-Campagnolo Nuovo Record Pista chain rings 46t, 50t, 52t. yes nos 144 bolt circle. Price 99.99.picture
2. NOS-Campagnolo Nuovo Record road chain rings 144 bolt circle 49t, 51t, 52t. 59.99.
3. NOS-Campagnolo Super Record road chain rings 144 bolt circle 45t, 46t, 49t, 51t, 52t. Price 79.99.
4. all most NOS-Campagnolo 36 tooth inner triple chainring looks perfect. Priced at 49.99. picture
5. Used-Campagnolo Nuovo Record NR chain rings all in good shape 144 mm bolt circle road 54-51-50-49. Price is 49.99 each picture
6. Used-Campagnolo Nuovo Record NR chain rings all in good shape 144 mm bolt circle road 53-52-43. Price is 59.99 each picture
7. Used-Campagnolo chain ring 42 teeth 116 mm bolt pattern fits the Victory lots of life left in these teeth. Priced at 29.99 picture
8. Used-Campagnolo SR Pantograph Detto Pietro chain ring 52 teeth 144 mm bolt pattern fits the SR/NR cranks lots of life left in these teeth. Priced at 69.99 picture
9. Used-Campagnolo SR chain rings 52 and 53 teeth 144 mm bolt pattern lots of life left in these teeth. Priced at 59.99 each picture
10. Used-Campagnolo SR chain ring 48 teeth 144 mm bolt pattern lots of life left in these teeth Priced at 49.99 each picture

Cranks

1. Used-Campagnolo Chorus 10 speed double aluminum crank 175 mm 53x39 teeth just about perfect. Price of only 149.99.picture
2. NOS-Campagnolo 170 mm steel crank set Record or Grand Sport I do not know how to tell the difference French threaded pedals 14x1.25. bought new on EBay then made into a single speed and mounted on a bike before they changed their mind and gave me the crank with out the smaller ring. Price is 99.99 picture
3. used-Campagnolo Mirage 172.5 mm crank set 53x 39 teeth with hex bolts. 135 mm bolt circle lots of life left here. Price is 39.99 picture
4. Used-Campagnolo Record 175 mm crank set 42x53 teeth. The date code on the right arm is 21 in a square and the left arm is 21 in a circle, riot. A little scratched up but should polish out well and the teeth look great. It also has the release type bolt. Price is 119.99 picture
5. Used-Campagnolo NR/SR 170 mm crank arm set. No date code on the left arm, 3 in a diamond on the right arm (1973). A few scratches and marks but no cracks and good threads and squire hold. In very good shape but It is polished instead of anodized. I do not know if that was original or not but it will polish up very nice and really shine. Price of 119.99.pictures
6. Used-Campagnolo NR triple crank 36x42x52 on 170 mm arms. No cracks just normal scuff marks and could use a good cleaning and no dust covers. Price of 299.99.picture
7. Used-Campagnolo SR 170 mm with both arms dated 1980 42 x 52 teeth very clean and no bad marks no cracks good threads the cleanest of the lot. Priced at 199.99 picture
8. Used-Campagnolo SR 172.5 mm with both arms not dated 42 x 52 teeth rings it does have the dust caps clean just small scratches on the two arms and rings, no cracks good threads. Priced at 189.99 picture
9. Used-Campagnolo SR 170 mm with drive arms dated 1980 and non drive arm dated 1982 42 x 53 teeth rings it does not have the dust caps a little dirty and some small scratches on the two arms and rings, no cracks good threads. Priced at 179.99 picture
10. Used-Campagnolo SR late model 172.5 mm with both arms dated 21 in a box 42 x 53 teeth non fluted arms, and it does have the dust caps a little dirty and some small scratches on the two arms and rings, no cracks good threads. Priced at 179.99 picture
11. Used-Campagnolo SR/NR 170 mm right side only crank arm dated 1985 it does have the dust cap very scratched up and dirty, but no cracks good threads. Priced at 49.99 picture
12. Used-Campagnolo Victory road crank 42x52 on 170 mm arms. No cracks just normal scuff marks and some red paint on the back. Could use a good cleaning and and has dust covers. Price of 59.99.picture
13. Used-Campagnolo Victory triple road crank 35x42x53 on 170 mm arms. Very clean just a few scuff marks on the crank arms. Even has the release crank type bolts. Priced to sell at 89.99.picture

Derailleurs

Derailleur Front

1. Used-Campagnolo unknown braze on front derailleur really needs nothing But a nut to hold it on and the spacer for the cage. Priced at 19.99.picture
2. Used-Campagnolo Chorus braze on front derailleur really needs nothing But it may not be the correct mounting screw only. Priced at 39.99.picture
3. Used-Campagnolo C Record braze on front derailleur look good except I do not think that little bend in the front part of the cage was put in by Campy. Price of only 29.99.picture
4. Used-Campagnolo Nuovo Record front derailleur 0 hole cage with both arms. The threads look good as the the chrome on the cage. Priced at 19.99.picture
5. Used-Campagnolo SR braze on black arms three hole front derailleur in great shape just nees a little cleaning. Priced at 39.99. picture
6. NOS-Campagnolo NR/SR chrome plated three hole cage. Just the cage but brand new it will make yours look so good and only 19.99. picture
7. NOS-Campagnolo NR/SR chrome plated three hole cage with both arms spring and spacer for the cage all brand new. Just use your body and there you go. Priced at 29.99 picture
8. Used-Campagnolo Nuovo/Super Record front derailleur 3 hole cage with one bad arm. The arm has no threads left in it. A few small scratches but other than that a great deal on a cage. Priced at 19.99.picture
9. Used-Campagnolo Nuovo/Super Record front derailleur 3 hole cage with one bad arm and spacer. The arm has no threads left in it. A few small scratches but other than that a great deal on a cage. Priced at 19.99.picture
10. Used-Campagnolo Nuovo/Super Record front derailleur 3 hole cage with both arms spring and spacer. A few small scratches but other than that great. Priced at 29.99.picture
11. Used-Campagnolo Nuovo/Super Record front derailleur body with chrome screws. It is in great shape and only. Priced at 19.99.picture
Used-Campagnolo NR/SR hinged front plate not much to say it is clean and cheap. Priced to sell at 9.99 picture
12. NOS-Campagnolo NR/SR hinged front plate I have 4 left then they are gone forever. Priced to sell at 19.99 picture
13. NOS-Campagnolo NR black front derailleur spring. Put that snap back in your shifting for only 9.99. picture
14. Used-Campagnolo Bolt on steel front plate not much to say it is clean and cheap. Priced to sell at 9.99 picture
15. Used-Campagnolo NR/SR lower arm. I have never seen one worn out but if it is here you go. Priced at 9.99 picture
16. NOS-Campagnolo NR/SR chrome front derailleur spring. Put that snap back in your shifting for only 9.99. picture
17. Used-Campagnolo NR clamp on front derailleur black screws has the clip for the upper arm no holes in very nice shape works great needs nothing. Priced at 39.99 picture
18. Used-Campagnolo NR/SR chrome plated three hole cage. Just the cage. It may be used but you can almost not see the ever so slight marks in side the cage so I will sell it for 12.99. picture
19. Used-Campagnolo NR clamp on front derailleur chrome screws 3 holes in great shape. Works great needs nothing except the clamping nut and bolt. Priced at 39.99 picture
20. Used-Campagnolo NR/SR clamp on front derailleur silver screws three holes in nice shape works great needs a little cleaning. Priced at 39.99 picture
21. Used-Campagnolo NR/SR clamp on front derailleur silver screws three holes nice shape work great. Priced at 39.99 picture
22. Used-Campagolo front derailleur missing the bolt that locates the shifter cage. I do not know if it is Valetino or Gran Sport. Price of only 9.99.picture
23. Used-Campagnolo Veloce front derailleur clamp on 28.6 mm for a double and looks good only 19.99. picture

Derailleur Rear

1. Used-Campagnolo Croce d'Aune rear derailleur in good shape just some road rash you can see in the picture. Price of only 29.99.picture
2. Used-Campagnolo index rear derailleur in good shape just some road rash you can see in the picture. Price of only 29.99.picture
3. Used-Campagnolo index rear derailleur in good shape just some road rash you can see in the picture. Price of only 39.99.picture
4. Used-Campagnolo early Record rear derailleur bronze body very clean and no bad marks the jockey pullies are plastic I do not know but I thought they should be metal. Priced at 99.99 picture
5. Used-Campagnolo Gran Turismo long cage rear derailleur very nice shape and all there. Priced at 59.99 picture
6. Used-Campagnolo Nuovo Record Rear derailleur lower pivot. A few small scratches but other than that nice. Priced at 9.99.picture
7. Used-Campagnolo Nuovo Gran sport front derailleur no holes cage with both arms and spring I think. I do not know all the Campy line as I wish I did. A few small scratches but other than that a great deal on a cage. Priced at 19.99.picture
8. Used-Campagnolo Nuovo Gran Sport rear derailleur. Looks clean but missing the pullies and I am pretty sure they never came with these pivots. I think they are the NR ones. Price of 39.99.pictures
9. Used-Campagnolo NR/SR lower pivot housing and stop. This is . Priced at 19.99.picture
10. Used-Campagnolo Nuovo Record rear derailleur dated 1971. An early year with a few scratches in it but straight and complete. Hard to fine this early. Price of 69.99.pictures
11. Used-Campagnolo Nuovo Record rear derailleur dated 1980 with lots of miles by the look of the pullies, the body is dirty but I think with a good cleaning it will be great for many more miles. Price of 49.99.pictures
12. Used-Campagnolo Nuovo Record rear derailleur dated 1981 missing a few parts, and the body is bent so it is for the parts only. Price of 29.99.pictures
13. Used-Campagnolo Nuovo Record rear derailleur dated 1982 missing a few parts, the upper pivot and the lower stop with the housing and the inner cage plate and pullies. Looks good and clean no bad marks. Price of 29.99.pictures
14. Used-Campagnolo Nuovo Record rear derailleur dated 1984 with a very fun upgrade it has Super Record titanium pivots both top and bottom. Looks good and clean no bad marks and so light. Price of 89.99.pictures
15. Used-Campagnolo early Nuovo Record rear derailleur 1970 body very clean and no bad marks only one of the jockey pullies are cracked. Priced at 59.99 picture
16. Used-Campagnolo rear derailleur body. I forget the model but it looks to be very useable still and cheap at only 9.99 picture
17. Used-Campagnolo Nuovo Record rear derailleur body 1975. Beat up but still works looks like someone may have replaced the lower body pivit. Looks cool I may make it into a tie clasp. Priced at 9.99.pictures
18. Used-Campagnolo Nuovo Record rear derailleur 1980 in great shape a crack on each pulley. Price of only 59.99.picture
19. Used-Campagnolo Nuovo Grand Sport rear derailleur needs a little cleaning but it is all there and it is in good shape. Priced at 49.99 picture
20. Used-Campagnolo Super Record rear derailleur inner plate. Price of only 19.99.picture
21. Used-Campagnolo Super Record rear derailleur dated 1979 not bad shape some small scuffs on the body and small amount on the pivots too. Price of only 59.99.picture
22. Used-Campagnolo rear derailleur housing with stop. Getting hard to find these anymore. Priced at 9.99.picture
23. Used-Campagnolo Super Record Rear derailleur lower pivot. The light weight Titanium one not the aluminum one. A few small scratches but other than that nice. Priced at 29.99.picture
24. Used-Campagnolo Super Record rear derailleur dated 1980 broken and missing parts rebuild it or better yet use it for parts. Price of 29.99.pictures
25. Used-Campagnolo Super Record rear derailleur dated 1981 in good shape original pulleys and a little scratches on the upper pivot. Price of only 59.99.picture
26. Used-Campagnolo Super Record rear derailleur dated 1983 in great shape a few scratches but still the best I got. Price of only 99.99.picture

Derailleur Shifters

1. Used-Campagnolo index down tube shifters arms. Clean but there is no parts other then the arms and I do not know which model they are. Price of only 19.99.picture
2. Used-Campagnolo Retro friction shifter arms, again I do not know which model they are. One small bend on an edge and there are no parts other then the arms. Price of only 9.99.picture
3. Used-Campagnolo braze on down tube friction shifters complete. Price of only 29.99.picture
4. Used-Campagnolo clamp for the down tube. Newer style with out the bolt. Price of only 9.99.picture
5. Used-Campagnolo assored small parts. Priced at 2.99 each.picture
6. NOS-Campagnolo left friction shift lever no parts and I do not know the model, Record Atena I do not know. Priced at 9.99.picture
7. Used-Campagnolo Record (I think) braze on down tube shifters 7 speed index great shape. Price of only 39.99.picture
8. Used-Campagnolo early Nuovo Record clamp on down tube friction shifters complete. Price of only 29.99.picture
9. Used-Campagnolo Nuovo Record clamp on down tube friction shifters. Older style with the black stop back plates and funny REG white hoods with a good clamp. The bad news is one of the arms is bent and no bolt. Price of only 14.99.picture
10. Used-Campagnolo braze on shifters. All there but the steel parts are a little rusty. Price of only 19.99.picture
11. Used-Campagnolo Nuovo Record braze on down tube friction shifters. Very clean on the alloy parts not so clean on the rest. Price of only 29.99.picture
12. Used-Campagnolo NR/SR arms for down tube shifters. Clean but there are no parts other then the arms. I have four sets of these the cleanest will go out first. Price of only 19.99.picture
13. Used-Campagnolo early NR arms for down tube shifters. Clean but there are no parts other then the arms. I have three sets of these the cleanest will go out first. Price of only 19.99.picture
14. Used-Campagnolo NR/SR down tube shifter clamp with alloy back plate nice clamp. Price of only 19.99.picture
15. Used-Campagnolo NR/SR down tube left shifter arm. The older ones with the little bumps all around. Price of only 9.99 for each one. picture
16. Used-Campagnolo Nuovo Record clamp on down tube shifters clamp with steel stop back plates not much cracking on the clamp yet. Price of only 19.99.picture
17. Used-Campagnolo Gran Sport or early NR shifters. The clamp does not look chrome so I am going to guess GS but you know more than me. Missing the pinch bolt. Price of only 19.99.picture
18. Used-Campagnolo Nuovo Grand Sport clamp on down tube shifters good shape needs some cleaning and a bolt. Price of only 15.99.picture
19. Used-Campagnolo Nuovo Grand Sport clamp on down tube shifters great shape you can even have the cables but I do not think the cables are Campy. Price of only 19.99.picture
20. Used-Campagnolo Nuovo Grand Sport single left side shift lever very nice but no bolt. Priced at 29.99 picture
21. Used-Campagnolo Gran Sport clamp on down tube shifters. Nice and clean with all the parts. Price of only 24.99.picture
22. Used-Campagnolo Gran Sport down tube friction shifters. Very clean but both the other plates are broken and it is missing the pinch bolt. So...it is for parts and remember these arms are NOT interchangeable with the NR/SR ones. Price of only 29.99.picture
23. Used-Campagnolo braze on down tube friction shifters arms only. Please I do not know the model, maybe Victory. Price of only 9.99.picture
24. Used-Campagnolo Eddy Merckx shifters made by modifing Campy NR/SR down tube brazed on shifters. Pretty good shape a little rust on the steel parts and a few scratches on the black alloy parts but all there and works great. Price of only 49.99.picture
25. Used-Campagnolo Victory braze on DT shifters all there and pretty clean. Price of 29.99.picture

Derailleur Stops and Guides

1. Used-Campagnolo assorted guides. The better ones are 14.99 the rusty ones are 9.99. Priced at 9.99-14.99.picture

Drop outs

1. NOS-Campagnolo rear drop out adjusters. These are the shorter ones used for what I think are called 1010B. They are about 28 mm with the silver head on. Priced at 9.99 for two.picture

Headsets

1. NOS-Campagnolo headset bearings for NR or SR headsets I have a few sets here. Price of only 19.99. picture
2. NOS-Campagnolo Chorus lock nut 1" threaded I think it is British. Priced at 19.99.picture
3. NOS-Campagnolo C Record headset lock nut French threads. Priced at 19.99.picture
4. NOS-Campagnolo C Record French threaded headset. With the little flat cut on the washer. I guess all French bikes have the flat cut on the steerer tube in stead of a grove. Price 99.99.picture
5. Used-Campagnolo GS Nuvov Grand Sport headset Italian threads a nice headset that has good looking chrome but it also looks like there was rust inside sometime ago that was cleaned out. Price of 39.99.picture
6. Used-Campagnolo GS headset British threads clean and low miles. Price of 49.99.picture
7. Used-Campagnolo GS headset lower cup nice shape low miles. Priced at 19.99.picture
8. Used-Campagnolo NR British threaded headset nice shape no dents a very small bit or little rust color inside and a couple wrench marks. Priced at 69.99.picture
9. Used-Campagnolo NR British threaded headset upper cup nice shape low miles. Priced at 19.99.picture
10. Campagnolo NR top headset cones one is new the other are used I have 6 in all. Priced at 19.99 for the new one and 9.99 for the used ones.picture
11. Used-Campagnolo SR Super Record Italian threaded headset looks good and feels good no pitting and only the lock nut has some marks. Price of only 89.99.picture
12. Used-Campagnolo SR Super Record British threaded headset looks good and feels good no pitting and no bad marks on the flats. Price of only 99.99.picture
13. Used-Campagnolo SR lower cups with no steel race in it. Very strange I have never seen this before they show signs of being installed so there must have been races in it before. Priced at 9.99 each I have two.picture
14. NOS-Campagnolo SR fork crown race perfect. Priced at 29.99.picture
15. Used-Campagnolo SR fork crown race poor shape and a little rust and some dents. Priced at 9.99.picture

Hubs

1. Used-Campagnolo front curve QR for I do not know what model. Priced at 19.99 picture
2. Used-Campagnolo front curve QR for I think some kind of mountain bike. Priced at 19.99 picture
3. Used-Campagnolo high flange 36 C-Record front hub with QR that could pass for new. Priced at only 149.99 picture
4. Used-Campagnolo NR/SR rear curve QR. Priced at 19.99 picture
5. Used-Campagnolo Tipo not complete front and rear flat lever QR's for road bikes the rear looks to be shortened. Priced at 19.99 picture
6. Used-Campagnolo rear QR it looks to be for road bikes with a 130 mm fit missing the little end. Priced at 9.99 picture
7. Used-Campagnolo rear QR it looks to be for mountain bikes with a 135 mm fit. Priced at 19.99 picture
8. Used-Campagnolo one left rear flat lever QR for road bikes with a 120 mm fit. Priced at 19.99 picture
9. NOS-Campagnolo Chorus low flange front hub 32 hole 100 mm with the QR. Priced at 59.99 picture
10. NOS-Campagnolo Chorus low flange hub 32 hole 126 mm with the QR. Priced at 39.99 picture
11. Used-Campagnolo GS headset British threads clean and low miles. Price of blue">39.99.picture
12. Used-Campagnolo GS 120 mm rear high flange Nuovo Tipo or Grand Sport hub with out the QR. The bearings feel smooth but I would still clean and repack this Italian threaded 36 hole hub. Price of only 39.99 picture
13. Used-Campagnolo GS 100 mm front low flange Nuovo Tipo or Grand Sport hub with the QR. The bearings feel smooth but I would still clean and repack this Italian made 36 hole hub. Price of only 39.99 picture
14. Used-Campagnolo GS front hub shell 36 hole with the dust covers and cups still in the shell. Price of only 19.99.picture
15. NOS-Campagnolo NR/SR low flange rear hub shell 24 hole British threaded with the cups and flat dust covers. Priced at 19.99 picture
16. NOS-Campagnolo NR front 36 hole low flange hub with a curve QR. Very sweet to see them brand new again. Priced at only 59.99.picture
17. Used-Campagnolo NR 100 mm front low flange hub 36 hole with out the QR. Right now I have four of these hubs they all feel good and they are only 29.99 each picture
18. Used-Campagnolo NR 100 mm front low flange hub 36 hole with out the QR. Just what I needed another one of these. Maybe I will clean a few up and charge more but still only 29.99 each picture
19. Used-Campagnolo NR high flange front hub 36 hole with the flat lever QR looks like it has very low miles but looking at the spoke holes. Priced at 49.99 picture
20. Used-Campagnolo NR high flange front hub 36 hole with no QR looks like it has very low miles but looking at the spoke holes. Priced at 39.99 picture
21. Used-Campagnolo NR high-low flange hub set 36 hole with out the QR's looks like it has some oxidation and will need some cleaning up. Priced at 79.99 picture
22. Used-Campagnolo NR low flange hub set 28 hole Italian threaded with the QR's looks like someone messed with the spacing to get a few more mm on the freewheel side 130 mm. Priced at 89.99 picture
23. Used-Campagnolo NR high flange hub set 36 hole Italian threaded 120 mm rear with no QR's feels great has been polished at some time and the little clips are starting to show some rust. Priced at 89.99 picture
24. Used-Campagnolo NR-SR low flange front hub no QR 36 hole very clean with a good oil clip. Price of 39.99.picture
25. Used-Campagnolo NR 36 hole low flange curve QR 100 mm front hub. Very original needs nothing. Priced at 59.99picture
26. Used-Campagnolo NR low flange rear hub 32 hole British threaded with the QR and unmolested you know probably never ever even repack so they can not mess it up. Priced at 59.99 picture
27. Used-Campagnolo NR low flange rear hub 32 hole British threaded with the QR and unmolested you know probably never ever even repack so they can not mess it up. Priced at 59.99 picture
28. Used-Campagnolo NR front 36 hole low flange hub with a flat QR. Very clean low mile built up only one time. Priced at only 49.99.picture
29. Used-Campagnolo NR front 36 hole high flange hub with a flat QR. Clean it up or let me polish it up and charge you more. Priced at only 39.99.picture
30. NOS-Campagnolo Record hubset front and rear. 100 mm front and 126 mm rear and get this 24 holes. I do not know many people that can ride a 24 hole wheel set but if you can here you go. Also you could take the QR's and axle sets for your wheels thay are getting harder to get too for a super low price of 99.99 picture

Pedals

1. Used-Campagnolo SL track left side only pedal missing the dust cap. Feels ok needs a little cleaning and some more grease. Priced at a low price of 19.99 picture
2. Used-Campagnolo NR Superleggeri also called SL road pedals. With Campy alloy toe clips and Alfredp Binda leather straps with REG end buttons. Feels great looks very good needs a little cleaning but no bad marks. Priced at 119.99 picture
3. Used-Campagnolo NR track right side only pedal missing the dust cap. Feels ok needs a little cleaning and some more grease. Priced at a low price of 19.99 picture
4. Used-Campagnolo NR pedals feels great looks good too needs a good cleaning a little rust removal and you are ready to go. Priced at a low price of 49.99 picture
5. Used-Campagnolo NR road pedals feels great looks good missing a dust cap. Latter model with out the toe strap tab. Priced at a low price of 49.99 picture
6. Used-Campagnolo Grand Sport road pedals feels great looks good missing a dust cap. Priced at a low price of 39.99 picture
7. NOS-Campagnolo Chorus aero Medium size steel toe clips. You now you want these right! Priced at a low price of 39.99 picture
8. NOS-Campagnolo Superleggeri road pedals still in the nice yellow box. Did I say it was new in the box and for 199.99 picture

Seatpost

1. NOS-Campagnolo Aero seatpost. Your guess is as good as mine. Chorus, Victory what ever it is new just shop wear on it and it is 25.0 size. That fits the old Alan and Vitus alloy frames. Price of 49.99.picture
2. Used-Campagnolo Chorus seat post 27.2 steel tube with alloy clamp. Looks good not very old and scratches about half way up. Price 29.99.picture
3. NOS-Campagnolo NR seat post 27.4 sill new in the box so cool. Looks like it pieced together because the two cradles are both the same and there are some scratches on the upper cross piece and about one centimeter at the bottom. Price 119.99.picture
4. NOS-Campagnolo NR seat post 25.8 sill new in the box so cool. Price 99.99.picture
5. Used-Campagnolo NR 27.2 seatpost 180 mm long. This late model post is the one that they lighten up the two little pivits in the body. Nice shape not perfect no bad marks. Price at 79.99.picture
6. Used-Campagnolo NR superleggero 27.2 seatpost 180 mm long. The SL post is the one that they lighten up the two little pivits in the body. Nice shape scratches up to the limit mark. Price at 59.99.picture
7. Used-Campagnolo NR seatpost 27.2 missing the clamps and bolts, the only reason I think some one may need this is if you want to change the size you all ready have because they never brake, standard 200 mm long a few scratches but not bad. Priced at only 19.99.picture
8. Used-Campagnolo NR seatpost 27.2 all there it is in pretty good shape standard 200 mm long a few scratches but not bad. Priced at only 49.99.picture
9. Used-Campagnolo NR seatpost 27.2 all there it is in pretty good shape has been polished up at some point standard 200 mm long a few scratches but not bad. Priced at only 49.99.picture
10. Used-Campagnolo NR seatpost 27.2 milled and has a B in it for Bianchi. This was put in a Bianchi frame but never ridden so you tell me is it NOS or not I call it used because it has been put in up to the limit mark. The price is 69.99.picture
11. Used-Campagnolo NR pivit steel in good shape. Priced at only 9.99.picture
12. Used-Campagnolo SR seatpost 26.8 that some one painted the flutes and it has a few small scratches all over the place. Not and easy size to fing and still will clean up nice for only 59.99.picture
13. Used-Campagnolo Victory 27.2 seatpost all scratched up on all the non-aero parts. Man that sucks. Price of 19.99.picture

Shifters Ergo

other stuff

French Components.

1. Used-ATAX French road stem. 70 mm reach, 21.9 quill, 25.4 mm bar clamp. In good shape. Remember this is a French stem and fits only French bikes. Price of 19.99.picture
2. Used-ATAX Philippe road bar, 430 mm center to center bar with a 25.4 clamp size. This very clean older French made bar will be a great Addison to an older French bike. Price of only 29.99. picture
3. Used-ATAX 70 mm, 22.0 quill, 72 degree, French made alloy road stem with a 25.4 clamp size. Price of only 19.99. picture
4. Used-Atom front QR nice shape looks good. Priced at 9.99 picture
5. Used-Atom 6 speed compact or also called an Ultra freewheel British threaded body with a 14,15,17,20,24,28 tooth cogs with a splined body. The teeth look good as does the splines. Priced at 29.99
6. Used-Atom 5 speed freewheel French threaded body with a 14,16,18,21,24 tooth cogs with a notched body. The teeth look good as does the notches. Priced at 29.99 picture
7. Used-Atom 700 right side only pedal. Feels very nice needs a good cleaning and some more grease. Priced at a low price of 9.99 picture
8. Used-AVA 75 mm, 22.0 quill, 75 degree, French made alloy road stem also know as the death stem with a 25.0 clamp size. Price of only 19.99. picture
9. Used-BF 90 mm, 22.2 quill, 72 degree, French made alloy road stem with the non French size of 25.4 clamp size. Price of only 19.99. picture
10. Used-CTA 90 mm, 22.0 quill, 72 degree, French made alloy road stem with a 25.0 clamp size. Price of only 19.99. picture
11. Used Cyclo Competition French made with French threads 14-21 five speed freewheel. Good notches and good teeth. Priced at 29.99. picture
12. Used-Cyclo 64 5 speed 14-28 French threaded freewheel. The teeth look good and it freewheels well. Price of only 19.99. picture
13. Used-Huret down tube friction shifter parts. Very clean. Price of only 9.99.picture
14. Used-Huret single sided five speed down tube shifter. Price of only 9.99 picture
15. Used Huret Allvit rear derailleur it works and except for the hanger bolt that holds it onto the frame it looks great straight and dirty. Price of 19.99.pictures
16. Used-Huret Allvit rear derailleur with hanger red label model a little scrached up but all there and works great. Priced at 29.99 picture
17. Used-Huret wing nuts 9.5x26tpi nice nut great shape and only three. Priced at 19.99picture
18. Used-Huret 3 top tube cable clips a little rust but way cool. Priced at 19.99.picture
19. Used-Huret clamp on bottom bracket cable guides. Price of only 14.99.picture
20. Used-Lyotard Berthet pedals in great shape and are British threads. Priced at 99.99. picture
21. Used-Lyotard Berthet pedals in a little ruffer shape but will clean up well and the bearing feel great on these French pedals with French threads. 29.99. picture
22. Used-Mafac brake levers for parts one body is cracked and chipped and they do not match. Price of only 9.99.picture
23. Used-Mafac racer caliper no wire or bolt. Price of only 9.99.picture
24. Used-Mafac rear caliper no wire or nuts and washers and missing a pad. Price of only 9.99.picture
25. Used-Mafac competition center pull front brake caliper mounts with a allen nut a little dirty but nice. Price of only 39.99.picture
26. Used-Mafac Competition center pull rear brake caliper. Old but correct pads, does not have the hanger or wire but does have the mounting hardware. Price of 29.99.picture
27. Used-Mallard 5 speed British threaded freewheel with a 14,17,19,21,24 tooth cogs with a splined body. The teeth look good as does the splined. Priced at 29.99 picture
28. Used-Mallard 5 speed French Threaded freewheel with a 14-28 tooth count with that large splined body. The teeth look great. Priced at 29.99 picture
29. Used-Mallard 6 speed British threaded freewheel with a 14-17-20-23-26-30 tooth count with that large splined body. The teeth look great and priced at 19.99 picture
30. Used-Maillard Helico Matic 126 mm with out the QR 36 hole rear hub with the 5 speed 14-17-20-24-28 freewheel that fits this hub only, I even have the spoke protector. The hub needs to be repacked it feels good but very dry. Priced at only 29.99 picture
31. Used-Maillard Helico Matic 122 mm with the QR 36 hole rear hub. The hub needs to be repacked it feels good but very dry. Priced at only 19.99 picture
32. Used-Maillard bolt on low flange British threaded 36 hole 124 mm hub but it has an extra nut so it should be 121 mm. I can take the nut off or you can if you want. Priced at 19.99. picture
33. Used-Maillard Professional 700 Team Issue QR 36 hole front low flange hub 100 mm with the QR looks good and will clean up nice too too. Priced at 19.99. picture
34. Used-Maillard QR 36 hole front low flange hub 97 mm with the QR looks good and feels good too. Priced at 12.99. picture
35. Used-Maillard QR 36 hole rear low flange hub 126 mm British threads with the QR looks great and feels good too. Priced at 29.99. picture
36. Used-Maillard front and rear hub set. High flange British threads 100 mm front and 122 mm with the QR's 36 holes. The hub needs to be repacked it feels good but a little dry. Priced at only 39.99 picture
37. Used-Mallard Spidel QR's nice shape looks like it would work 100x126 mm set. Priced at 19.99 picture
38. Used-Mavic look style pedals lots of adjustable float black and yellow in color and well used no cleat but cheep. Works with look black or red cleats. Priced at 19.99 picture
39. Used-Mavic Sealed bearing rear hub 32 hole 135 mm British threaded could all most pass for new with QR. Price of 39.99.picture
40. Used-Mavic Sealed bearing rear hub 32 hole low flange British threads 126 mm rear with QR. Priced at 39.99 picture
41. NOS-Mavic GP-4 700c rims just one dark gray hardened 36 hole tubular rims. The standard rim for so many years. Never built up just sat around the shop. Price 49.99 each.picture
42. Used-Nervar French made bottom bracket cups with British threads. Nervar is not the biggest name in cranks that came from France but still a well made crank and if you need good cups that need a little cleaning but still has no pits here you go. It is priced at 19.99. picture
43. Used-Nervar French made 115 mm bottom bracket spindle and one fixed cup with British threads. Price of only 14.99. picture
44. Used-no name 40 mm, 22.0 quill, 72 degree, French made alloy road stem with a 23.5 clamp size. Price of only 12.99. picture
45. Used-Normandy front hub 36 hole high flange with QR dated 1979. Priced at 19.99picture
46. Used-Normandy front hub 36 hole high flange with QR looks good and feels good. Priced at 19.99picture
47. Used-Normandy rear hub 36 hole high flange British threaded 120 mm with QR. Priced at 19.99picture
48. Used-Normandy rear hub 40 hole high flange French threaded bolt on. Very different looking hub. I have never seen one like this before. The spoke holes are larger then normal too. I am going to guess it is for a tandem. It is also not set up with the spacer or locknuts yet but it feels very nice. Priced at 29.99.picture
49. Used-Motobecame Randonneur road bar, 400 mm center to center bar with a 25.0 clamp size. This neat older Motobecame I think French made bar will fit any of the older French bikes but should go to a Motobecame. Price of only 9.99. picture
50. Used-Peugeot rear brake calipers no pads or nut and washers looks like 50 to 60 mm reach I think it is made by Weinmann. Price of only 9.99.picture
51. Used-PIVO road bar and stem, 390 mm center to center bar with a 100 mm stem with a 22.0 quill with a 25.0 clamp size. This way cool older French bar and stem will be a great addition to any older high end french bike. Price of only 49.99. picture
52. Used-PIVO 65 mm, 22.0 quill, 74 degree, French made alloy road stem with a 25.0 clamp size. Price of only 12.99. picture
53. Used-Sachs 7 speed all most new shape British threaded 13-24 freewheel. Priced at 39.99. picture
54. NOS-SACHS Still in the box 8 speed free wheel 12 through 21 teeth, yes that would be a straight block. Only one left and it is at the low price of 79.99.
55. NOS-Saturne clincher rims two 27 inch 32 hole. Made in france. Price 29.99 each.
56. Used-Schwinn Randonneur road bar and stem, 420 mm center to center bar with a 90 mm stem with a .833 quill with a 25.0 clamp size. This ruff older Schwinn I think French made bar and stem will fit any of the older Schwinns with the .833 quill size. Price of only 29.99. picture
57. Used-Schwinn approved French made hubs front and rear 36 hole low flange British threaded 126 mm rear and 97 mm front with nuts. Priced at 29.99picture
58. Used-Simplex rear QR with a white hood on the qr. Very old style with the qr lever going through the head. Missing the spring that goes under the black wing end. Price 19.99.picture
59. Used-Simplex rear QR with a black hood on the qr. Very old style with the qr lever going through the head. Complete with all three springs. Price 19.99.picture
60. Used Simplex prestige rear derailleur works is about all I can say. Price of 4.99.pictures
61. Used-Simplex chain rings 52 x 47 teeth 6 holes lots of life left in these teeth. Priced at 129.99 picture
62. Used-Stronglight British threaded 120 mm with bolts bottom bracket looks almost new may have been installed and not used. Price is 79.99 picture
63. Used-Stronglight French threaded cups in nice shape with a little chrome coming off the out side of the fix cup. 14.99 picture
64. Used-Stronglight French threaded 118 mm bottom bracket. No ball bearings but the axle and cups look good. Just the chrome coming off the out side of the fix cup. 39.99 picture
65. Used-Stronglight 49 170 mm crank set 52x 40 teeth rings with dust caps and bolts with French threads 14x1.25 pedal threads. Looks great very clean. Price is 199.99 picture
66. Used-Stronglight 93 crank arm 170 mm with British threads and 42 x 52 teeth and a chain guard nice and dirty with only small scratches and small marks and has no cracks good threads. Priced at 139.99 picture
67. Used-Stronglight chain ring 40 teeth 85 mm bolt pattern fits the 99 lots of life left in these teeth. Priced at 29.99 picture
68. Used-Stronglight chain rings 44 x 52 teeth 122 mm bolt pattern fits the 93 lots of life left in these teeth. Priced at 79.99 picture
69. NOS-Stronglight A-9 headset British threads 1" roller bearings in black with 26.4 crown race.49.99 each. Only five left.
70. NOS-Super Champion Arc en ciel tubular rims 32 hole with a little shop wear. Priced for the set at 99.99 picture
71. Used-TA French made TA 373 119.8 mm long spindle that could almost pass for new. Sorry to say I do not remember my TA fit any more so you have to know if this works for you or not. It is priced at 19.99. picture
72. NOS-Tressostar blue bar tape for dropped bars needs two to do a bar 4.99 each. Only two left.
73. NOS-Velox faded white bar plugs for dropped bars needs two to do a bar. I also have the new black ones not faded at the same price. 3.99 for two. Only 6 white ones left. picture
74. NOS-Wolber Aspin 36 hole Super Champion aluminum hard coated tubular rims. Ver strong very light and very fast. Price 79.99 for the set. picture
75. NOS-Wolber TX Profil 700c rims yes two new old stock 28 hole clincher rims the best clincher ever made and stll perfect. Price 59.99 each. picture

German Components

1. Used-Altonburger a single brake lever body and only 5.99. picture

Italian Components but not Campagnolo.

1. NOS-Ambrosio Volie Campione Del Mondo 43 center to center with a 26.4 clamp size, so yes it will fit your old Cinelli. Price of only 39.99. picture
2. Used-Avocet triple road crank. 170 mm long, 144,100,74 mm bolt circle, 54-44-36 tooth rings. It looks to be in pretty good shape but if I remember right these Ofmega made crank broke a lot. If you want a real rider I would look at another brand. But for your show bike would be cool. Remember these used Ofmega bb that had a unique spindle. Priced at only 39.99 picture
3. Vintage-Headset no name chrome headset with 27.0 crown race size looks good came off an old Italian bike sorry I forgot the brand of bike. Priced at only 19.99 picture
4. Used-Saddle no name suede saddle all I can see is MADE IN ITALY in the inside no tears cracks or rips. Priced at only 19.99 picture
5. Used-Avocet Touring II leather cover saddle. This was the best at the time made in Italy and in great shape. Priced at 29.99.picture
6. NOS-Benotto red bar tape. Found a set in the back of the shop so if you need it I have one at only 4.99. picture
7. Used-Caimi 5 speed extra Italian threaded freewheel with a 14,16,18,20,22 tooth cogs with a notched body. The 14 tooth is missing a tooth but the rest of the teeth look good as does the notches. Priced at 39.99 picture
8. Used-Cinelli 1A 130 mm stem with a 64 40 bar with a clamp size of 26.4 mm. It was missing the stem bolt so I had an aluminum Cinelli bolt to put in it. Way cool, the set is priced at 39.99 each picture
9. NOS-Cinelli 1R stem clamp in alloy and I have only one left then that is it priced at 19.99 each picture
10. NOS-Cinelli 1R stem wedge with the bolt I have only one left and only 19.99. picture
11. NOS-Cinelli Grammo Strada titanium stem. 26.0 mm clamp on a sleek looking 73 degree standard looking 130 mm long 22.2 (1") quill still in the box. Price at a high 199.99. picture
12. NOS-Cinelli Grammo Strada titanium stem top plug. I have one left. So if you lost yours this may be your lucky day and only 9.99 each.
13. NOS-Cinelli XA 120 mm with a 26.0 mm clamp size still in the box and yes it is perfect. Priced at 59.99 picture
14. NOS-Cinelli XA 100 mm with a 26.4 mm clamp size loose and even worse then being loose some one lost the bolt with the little colored peace and also the front black plastic cap. They are probably here in the store but hell if I can find them. So if you have this stem or a longer or maybe shorter one and can use your parts and want to make yours look better then this may be for you, and only 29.99 picture
15. Used-Cinelli Giro D'Italia 64 road bar, 390 mm center to center bar with a 26.4 clamp size. This round older bar has very nice looking engravings on the sleeve. Price of only 19.99. picture
16. Used-Cinelli Giro D'Italia 64 road bar, 400 mm center to center bar with a 26.4 clamp size. This round older bar has very nice looking engravings on the sleeve. Price of only 19.99. picture
17. Used-Cinelli 1A 110 mm, 22.2 quill, 72 degree, Italian made alloy road stem with a 26.4 clamp size a little rust on the steel bolts. I think this was one of the TTT made ones. Price of only 19.99. picture
18. Used-Cinelli 1R 110 mm, 22.2 quill, 72 degree, Italian made alloy road stem with a 26.4 clamp size, wing C on the front badge with the alloy quill bolt and steel clamp and very clean. Price of only 39.99. picture
19. Used-Cinelli 1R 120 mm, 22.2 quill, 72 degree, Italian made alloy road stem with a 26.4 clamp size wing C on the front badge with the alloy quill bolt and alloy clamp. This stem was pushed in all the way and someone hit the stem bolt with a hammer so the price is only 29.99. picture
20. Used-Cinelli 1A 140 mm, 22.2 quill, 72 degree, Italian made alloy road stem with a 26.4 clamp size pretty clean, looks like some one got happy with the polish, older one that tightens from the back with a 6 mm allen key. Price of only 29.99. picture
21. Used-Fiamme red label rims in 36 hole. Looks to be round and true but since I got them like this I can not tell for sure. What you see of the labels is all that is left. Would polish up real nice. Priced at only 29.99 for both. picture
22. Used-Fiamme road bar and stem, 400 mm center to center bar with a 100 mm stem with a 22.2 quill with a 26.0 clamp size. This way cool older Italian bar and stem will be a great addition to any older Italian bike. Price of only 59.99. picture
23. NOS-Galli 28 hole 700c clinchers rims just a little shop ware for being moved around and not covered. Price 39.99 each. picture
24. Used-Gipiemme Italian threaded cups 36x24 tpi. They are very clean no pits or rust the lock ring is not as good as the cups. Price at only 19.99 picture
25. Used-Gipiemme lower end seatpost 26.8. Cast aluminum with flutes but it has steel clamp. Cheep at only 9.99. picture
26. Used-Gnutti QR lever. Great chrome on this little know brand. Priced to sell at 9.99 picture
27. Used-GPM I think they are GPM because there is no name, chain rings 52 x 39 teeth 130 mm bolt pattern lots of life left in these teeth. Priced at 59.99 picture
28. NOS-ISCA Celeste green suede saddle. Older seat that has been sitting around for ever. A little rust spots are starting to show up on the rails so that would make them steel. Cheap price of only 39.99 picture
29. Used-ITM road stem 90 mm, 22.2 quill, 90 degree, with Bianchi printed on it very light Italian made stem with a 26.0 clamp size. Price of only 29.99. picture
30. Used-ITM Racing Super 330 road bar, 400 mm center to center bar with a 26.0 clamp size. This black Anatomic bend double ERGO grooved bar should give a few more years of service. Price of only 9.99. picture
31. Used-ITM Bianchi 10 cm threadless stem. 1 1/8" steerer tube clamp and 26.0 bar clamp. One of the clamp bolts is wrong and a small amount of rust is starting on the bolts. Priced at only 19.99. picture
32. Used-Legnano cotted crank arms 170 mm with a single 50 teeth ring dated 59 on the back it is a little rusty but should clean up well with only small scratches and small marks and has no cracks good threads. Priced at 139.99 picture
33. Used-Miche low flange front hub 36 hole with a QR 100 mm Campy look alike and very clean. Price of only 29.99 picture
34. Used-Miche Italian made Italian threads 36x24 bottom bracket with a 115.4 mm long spindle that could almost pass for new. Sorry to say I do not remember if Miche is interchangeable with Campy so you have to know if this works for you or not. It is priced at 39.99. picture
35. Used-Modolo stem cap. I do not remember the model it fits so you will nee to figure that out your self. Price of only 9.99.picture
36. NOS-Modolo hoods grey in color and one is starting to get a little yellow on it. They fit the old style Campy NR and SR brake levers too. Price of 39.99.picture
37. NOS-Modolo pink brake lever hoods. Dirty but maybe you can clean them up. They fit Campagnolo bodies too. Price of only 19.99.picture
38. NOS-Modolo pink brake lever hood. Dirty but maybe you can clean it up. It fits Campagnolo bodies too. Price of only 9.99.picture
39. NOS-Modolo Gum hoods 919 not the anatomical one but the ones that look just like Campy NR/SR sorry but 39.99 Just to warn you these are NOS which means New Old Stock. Be very careful putting them on there is no warranty. To keep from ripping them I install then from the back side of the lever and I use a little dish washing soap smeared on the lever body and inside the hood. I just got three sets left.
40. Used-Ofmega rear QR nice shape looks like it would work 126 mm. Priced at 9.99 picture
41. Used-OMAS 36 hole titanium axle 126 mm rear hub will polish up very nice and is very light. Price of only 29.99. picture
42. NOS-OMAS sealed bearing QR axles 5 speed steel. Priced at 9.99 each I have three left. picture
43. Used-OMAS sealed bearing front hub 36 hole low flange with QR missing the D ring Priced at 29.99picture
44. Used-Pirelli Motormount I think leather covered saddle made in Italy with cool elastomer pads under the paint coming off the rails. Priced at 19.99.picture
45. Used-REG top clip strap end buttons I have one set of red and three sets of black. there is also a single red one if somebody needs it. Priced at 4.99 a set.picture
46. Used-Regina America 6 speed 13-14-15-17-19-21 British threaded low miles freewheel in it's little tin box. Price of 39.99.picture
47. Used-Regina Extra BX British threaded 6 speed 13-15-17-19-21-23 very low miles and ready to go for only 39.99.picture
48. Used-Regina Extra British threaded body with the last three cogs 15, 17, 19 tooth this is the close ratio body with a splined body. The teeth look good as does the spines. Priced at 29.99 picture
49. Used-Regina 5 speed corse Italian threaded freewheel with a 14,16,18,20,22 tooth cogs with a notched body. The teeth look good as does the notches. Priced at 39.99 picture
50. Used-Regina 5 speed oro Italian threaded freewheel with a 14,16,18,20,24 tooth cogs with a notched body. The teeth look good as does the notches. Priced at 39.99 picture
51. Used-Regina 6 speed extra British threaded freewheel with a 14,16,18,20,22,24 tooth cogs with a splined body. The teeth look good as does the splines. Priced at 39.99 picture
52. Used-Saturne tubular rim only one 32 hole very clean rim no dents or brake pad marks. Made by Nisi and heavy at 420 grams. Price 19.99.
53. NOS-Selle Italia Bianchi Celeste green saddle still in the bag for your Bianchi for only 59.99.picture
54. NOS-Selle Italia Turbo Pro-Team Indurain Limited Edition saddle loose no box but perfect. This 283 gram saddle is just so nice and only 159.99.picture
55. Used-Selle Italia Turbo Matic 2 saddle with Manganese rails. This saddle weighs 292 grams and looks great for the price of 69.99.picture
56. Used-Selle Italia Flite TT that hollow titanium tube rails and is only 168.6 grams it says it is 165 but I weighed it. Very clean and light. Priced at 49.99.picture
57. Used-Selle Sam Marco Era saddle with Titinox rails. I think that is some alloy of steel. It is very light at 215 grams and looks great too price set at 49.99.picture
58. NOS-SERGAL cycling shorts made in Milano size 5 no leg grippers and looks like real shammie. Price at only39.99
59. Used-Terry Men's saddle made by Selle Royal in Italy in good shape no tares or rips it with way cool elastomer pads under the rails. Priced at 9.99.picture
60. Used-Terry leather covered women's saddle with that hole in the middle in good shape no tares or rips but the leather is starting to pull away underneath, with way cool elastomer pads under the rails. Priced at 19.99.picture
61. Used-TTT Forma SL road racing bar, 440 mm outside to outside bar with a 25.8 clamp size. This is a nice round light single grove racing bar. Price of only 19.99. picture
62. Used-TTT Forma SL road racing bar, 440 mm outside to outside bar with a 25.8 clamp size. This is a nice lightly faded double grooved, for campy Ergo, dropped handle bar racing bar with the glue from the tape still there for you. Price of only 19.99. picture
63. Used-TTT MORPHE road bar, 420 mm out side to out side bar with a 25.8 clamp size. This round older bar is double grooved for ERGO and it bends back a little for comfort. Price of only 19.99. picture
64. Used-TTT Italian made road stem. 120 mm reach, 22.2 quill, 25.8 mm bar clamp. In good shape. Remember this is a 3TTT stem and fits only 3TTT bar correctly. Price of 19.99.picture
65. Used-TTT 90 mm, 22.2 quill, 72 degree, Italian made alloy road stem with a 25.8 clamp size pretty clean older one that tightens from the front missing a top rubber plug because the quill bult is counter sunk in there. Price of only 19.99. picture
66. Used-TTT 100 mm, 22.2 quill, 72 degree, Italian made alloy road stem with a 25.8 clamp size pretty clean older one that tightens from the under side missing a little screw that opens the stem up to make it easer to put on a bar. Price of only 19.99. picture
67. Used-TTT Forgie threadless stem 130 mm black 25.8 bar and 28.6 clamp for the steerer tube that is also known as 1 1/8". Black in color and looks almost new with the box. 14.99. picture
68. Used-TTT Status stem 130 mm, 22.2 quill and a 25.8 bar, clamp some marks on the quill from use and from being held in a vise and it is missing the stem cap. Price 29.99. picture
69. Used-TTT stem 110 mm silver 22.2 quill and a 25.8 clamp size in silver. Price 29.99. picture
70. Used-TTT 115 mm, 22.2 quill, 72 degree, Italian made alloy road stem with a 25.8 clamp size pretty clean older one that tightens from the front. Price of only 19.99. picture
71. Used-Universal gum hooded brake levers pretty clean just a few scratches and the hoods are dried out and cracking. Priced at 29.99. picture
72. Used-Universal brake levers. Both bodies are broken and missing the straps that go around the bar. What you get is two pull up bolts, two nice blades and two of the adjusters as you can see in the pictures. Priced at only 14.99 picture
73. Used-Universal brake caliper Mod 61 about 54 to 70 mm reach . missing parts so it is for parts only but it is in good shape. Price of only 29.99.picture
74. Used-Universal rear brake caliper about 55 to 65 mm reach . Missing one pad and yes it is dirty and I found the wire after the picture was take. Price of only 9.99.picture
75. Used-Vetta Transverse TT saddle made in Italy in good shape a small tare on either side where the rails hit the saddle. It has a cool suspension built in to the rails. Priced at 19.99.picture

Japanese Components.

Arai

1. Used-Arai stem 90 mm, .833 quill, 73 degree, Japanese made alloy road stem with a 25.4 clamp size fits older American made Schwinns. Price of only 9.99. picture

Dia-Compe

1. Used-Dia-Compe 500 short reach front brake allen key type mounting and wheel guides would be great for a fixed gear bike. Priced at 9.99. picture
2. NOS-Dia-Comp 500 caliper about 47 to 57 mm reach. Has a QR, wheel guides and a barrel adjusters and uses a 10 mm nuts to secure it to the bike. Price of only 19.99.picture
3. Used-Dia Compe Brake lever left side. This is one of the early ones that look like it came off a motor cycle. Priced at 9.99 picture
4. Used-Dia-Compe early aero drop bar levers with the oh so easy to loose stops that fit inside the lever. Hell the stops are worth as much as the levers at only 19.99 picture
5. Used-Dia-Compe early front center pull brake. Missing the hardware to mount it to your frame. You can tell it is an early one because it does not have that pin that they borrowed from Weinmann to help center the brakes. Same length as the Weinmann 610. Price of 9.99.picture
6. Used-Dia-Compe 500 short reach beat up front brake with 10 mm nut to mount it on your fork great for a fixed gear bike. Priced at 9.99. picture
7. Used-Dia-Compe 500 short reach 45 mm to about 55 mm with a 10 mm mounting nut. Looks very clean and only 15.99. picture
8. Used-Dia-Compe Schwinn approved side pull medium reach looks to be 55 to 70 mm all there and straight with 10 mm mounting nuts. Price of 19.99.picture
9. Used-Dia-Compe center pull brake set with the levers and even the extension levers. Uses 10 mm nut to mount it and has 22.0 m bar clamps. Priced at 19.99. picture
10. Used-Dia-Compe AD-990 U brake off an old mountain bike so cool. Looks great works great just make sure your studs are the right ones. Price of 19.99.picture
11. Used-Dia-Compe non-aero no QR brake levers with the cool little holes for the weight weenie in me. Pretty clean no hoods for 9.99.picture
12. Used-Dia-Compe full brake set. Very clean 500 reach, 10 mm nut mount with wheel guides and QR on the calipers and with rotting gum hood and those stupid extension levers but I am tossing in the replacement pins to take them off all for 29.99.picture

Dura Ace

1. Used-Dura Ace Aero front hub 32 hole low flange with out QR. Priced at 19.99picture
2. Used-Dura Ace sealed bearing British threaded bottom bracket 103 mm bb-7410 from the old 9 speed days looks great works even better. Price of only 29.99.picture
3. Used-Dura Ace right crank with two rings 53 and 39. The 39 is starting to hook they are coded FC-7410 looks good and cheap. Priced at 19.99 picture
4. NOS-Dura Ace titanium crank bolts 8 mm hex key. Price of only 19.99.picture
5. Used-Dura Ace rear derailleur with some go fast mods one is the titanium upper pivot the other is an alloy lower pulley in red so cool. For the old 8 speed stuff. Price of only 39.99.picture
6. Used-Dura Ace braze on front derailleur FD-7410 from the old 8 speed days looks ok works good. Price of only 29.99.picture
7. Used-Dura-Ace center pull brake calipers Looks like about 50 to 62 mm reach and it is all there. Price of only 49.99.picture
8. Used-Dura-Ace 32 hole front EX hub Aero. The bearings feel good but needs a good cleaning and repacking. Price 19.99 picture
9. Used-Dura Ace 6 speed freewheel British threaded body with a 13,15,17,19,21,23 tooth cogs with a splined body. The teeth look good as does the splines. Priced at 49.99 picture
10. Used-Dura-Ace 12-23 9 speed cassette. I do not like to sell freewheels or cassette because it is very hard to tell how much life is really left on them. But, people are asking for them so here you go. Price cheap at 19.99 picture
11. Dura-Ace loose set of EX DD Dyna Drive Pedals fits the cranks right below. Looks great no clips just some shop wear. Price 59.99 for the pair. picture
12. Dura-Ace EX 170mm crank arms with the over size pedal holes fpr Dyna Drive pedals. Pretty clean with not a lot of miles. Price 99.99.

Hatta

1. Used-Hatta bottom bracket set. British threaded complete with bolts and sleeve and one very long axle of 127.5 mm. It could almost pass for new. The key part to this set is that 127 size you just can not find them any more. Price 19.99.picture

Kalloy

1. Used-CarbonLORD 31.6 carbon fiber seat post in great shape. Looks like it was cut down from a longer size so it is 240 mm from clamp to bottom of post. I am only guessing it is made by Kalloy and I know it is not old but I have no were else to list it. Price of 19.99.picture
2. NOS-Kalloy ATB hard surface treatment seatpost in a 26.0x350 mm good for you real tall guys out there. Priced at only 19.99.picture
3. Used-Kalloy seatpost in a 26.6x230 mm size in good shape. This is the cheaper one with the steel clamp. Priced at only 9.99.picture

KKT

1. Used-KKT Quill road pedals British threads look great and spin great too. Price 14.99. picture

MKS

1. Used-MKS Mikashimax track pedals British threads needs a good cleaning but they are straight and spin great too. Price 19.99.picture
2. Used-MKS Touring pedals with reflecters. A nice set of well made all alloy touring pedals with the dust caps and clean threads price to sell at 19.99.picture

NITTO

1. NOS-NITTO B115 450 road bar, 450 mm center to center bar with a 25.4 clamp size. This very wide bar will give you more room to mount you stuff. Price of only 29.99. picture
2. Used-NITTO road bar, 440 mm center to center bar with a 26.0 clamp size. This wide round racing bar could almost pass for new. Price of only 29.99. picture
3. NOS-NITTO road bar, 400 mm center to center bar with a 25.4 clamp size. This is a round racing bar. Price of only 29.99. picture
4. Used-NITTO Randonneur road bar, 390 mm center to center bar with a 25.4 clamp size. This round older bar set up for toutring. Price of only 9.99. picture
5. Used-NITTO Randonneur road bar marked Takara, 410 mm center to center bar with a 25.4 clamp size. This round older bar set up for touring. Price of only 9.99. picture
6. Used-NITTO road bar and stem, 370 mm center to center bar with a 70 mm stem with a 22.2 quill with a 26.0 clamp size. This older small bar and stem will clean up very nicely. Price of only 19.99. picture
7. Used-NITTO road stem 70 mm, 22.2 quill, 72 degree, with a 25.4 clamp size will clean up very nice. Price of only 12.99. picture
8. Used-NITTO road stem 100 mm, 22.2 quill, 72 degree, with a 25.4 clamp size will clean up very nice. Price of only 12.99. picture
9. Used-Specialized road stem. 100mm, 22.2 quill, 25.4 mm bar clamp in great shape. I was told this was forged by Nitto of Japan. Price of 19.99.picture

Ritchey

1. Used-Ritchey road pedals British threads and they do not have the cleats. Price 19.99.picture

Shimano

1. Used-Shimano Suntour assorted clamps from the two big S companies of Japan all of then are as is. Price of only 5.99.picture
2. NOS-Shimano NJS 47 tooth 51 mm bolt circle track ring. I did not know they ever made these but here is one for sale and it is one strong looking ring for 69.99. picture
3. Used Shimano front hub with QR. 100 mm 32 hole HB2200 hub in great shape and I will toss in a 36 hole 135 mm rear hub all for the price of a QR. Priced at 12.99. picture
4. NOS-Shimano rear hub 32 hole low flange 126 mm with QR HB-RA50. Priced at 29.99picture
5. Used-Shimano 6 speed cassette cog set. An early set with no Hyperglide shift points 13-28. Priced at 19.99. picture
6. Used-Shimano6 speed cassette with a 13,15,17,19,24,28 tooth cogs with a body still on it but the body is just to hold the cogs it is not working. The teeth look good. Priced at 19.99
7. Used-Shimano unknown model alloy 36 hole front 100 mm with QR feels great hub. Priced at only 12.99 picture
8. Used-Shimano Parallax rear hub 32 hole low flange 8 speed cassette 135 mm rear with the original QR almost new. Priced at 19.99 picture
9. Used-Shimano 105 32 hole low flange no QR 100 mm front hub. Very original needs knothing. Priced at 19.99picture
10. Used-Shimano 105 front hub with 32 holes. Nice and clean just build it and ride. Price of 9.99.picture
11. NOS-Shimano 105 aero peddles with toe clips and straps. Shop wear and tear but still new. Price of 49.99.picture
12. Used-Shimano Tourney side pull brakes looks like 45 to 60 mm reach QR on the front but not rear and has bolt mounts needs your cleaning. Price of only 9.99.picture
13. Used-Shimano Ultegra 600 STI 2x8 speed lever set. A few scratches but still works great and the hoods even look good. The sweet price is only 89.99.picture
14. Used-Shimano Ultegra STI 9 speed triple lever set. Very clean not a mark on them. The owner went to ten speed and asked me to sell these for him. The price is only 159.99.
15. NOS-Shimano Ultegra 42 tooth inner rings brand new. No pickup pins or "W" cut teeth just the ring. Priced at 36.99.picture
16. Used-Shimano 8 speed SIS barend shifters work great looks to be in very good condistion too. Price of 39.99.picture
17. Used-Shimano Ulegra braze on triple front derailleur in great shape the customer just went to a double. Priced at 29.99. picture
18. Used-Shimano style clipless peddles look okay and feel good but I am not sure of the brand. Works with Shimano cleats. Price of 19.99.picture
19. Used-Shimano R600 I think Ultegra clipless road pedals nice condition but no cleats. Priced at 29.99. picture
20. Used-Shimano 600 front and rear hub set with out the QR's. 32 hole 100 mm front and 130 mm rear yes that makes it an early 8 speed. in great shape low miles all ready to build up and ride. Remember these babys will take 8, 9, or 10, speed cassettes. Priced at 49.99. picture
21. Used-Shimano 600 front hub set with out the QR 32 hole in great shape as the fronts always seem to be for only 19.99. picture
22. Used-Shimano Ultegra triple 172.5 crank with the matching British threaded bottom bracket. The customer wanted to go to a double so here it is. Priced at 79.99. picture
23. Used-Shimano 8 speed 12-21 cassette I think it was Ultegra. I still run 8 speed but I need more than this. Price of 9.99.picture
24. NOS-Shimano British threads 1.37x24 adjustable cup. It is priced at 9.99. picture
25. Used-Shimano Italian threaded cup set. Nice and clean hard to get cups with the original lock ring. It is priced at 19.99. picture
26. NOS-Shimano Italian threads 36x24 adjustable cup. It is priced at 9.99. picture
27. Used-Shimano British threaded 117.5 mm bottom bracket with those rubber cup seals with bearings. This bb is still so smooth with very low miles and the only code I can see on it is D-3A. It is priced at 29.99. picture
28. Used-Shimano sealed bearing Italian threaded bb BB-6500 109.5 mm splined. Price of only 24.99. picture
29. Used-Shimano 600 Arabesque derailleur set with the botton bracket guide too. A little scratched up but was working great when I took if off and found out this stuff is pretty cool. Could use a good cleaning and will let you do that. Priced at 49.99 for the set. picture
30. Used-Shimano 600 loose bearing bottom bracket 115 mm in very good shape missing some little black plastic seal thing on one side. Price of only 19.99.picture
31. Used-Shimano 600 front derailleur FD-6401 1 1/8 inch clamp on from the old 8 speed days looks ok works good. Price of only 19.99.picture
32. Used-Shimano 600 rear derailleur RD-6401 from the old 8 speed days looks ok works good. Price of only 29.99.picture
33. Used-Shimano 600 RD 6401 rear derailleur all original and wooks great needs a little cleaning. Price of 29.99.picture
34. Used-Shimano 600 double pivot brakes BR-6408 from the old 8 speed days looks great works even better. Price of only 59.99.picture
35. Used-Shimano two 600 sealed bearing headset HP-6500 from the old 8 speed days looks great works even better. Price of only 29.99.picture
36. Used-Shimano 600 loose set of AX DD Dyna Drive Pedals fits the cranks right below. Looks great no clips just some shop wear. Price 49.99 pair.
37. Used-Shimano loose set of DD Dyna Drive Pedals fits the cranks right below. Looks good no clips or screws just some shop wear. Price 39.99 pair. picture
38. Used-Shimano 600 crank set 47x39 teeth 170 mm arms very dirty but other then that nice. 49.99 picture
39. Used-Shimano 600 13-28 6 speed clean low miles. Priced at only 29.99.picture
40. Used-Shimano clamp on down tube friction shifters complete model Z401. Price of only 19.99.picture
41. NOS-Shimano 600 EX front derailleur with 1 1/8" clamp size for double rings. Price 19.99.
42. Used-Shimano 600 (arabesque type) front derailleur with 1 1/8" clamp size for double rings. Price 19.99.
43. Used-Shimano rings 53x39 teeth dirty but other then that nice and low miles. 19.99 both picture
44. NOS-Shimano clamp on downtube cable guide with stop for the front derailleur and rear derailleur chain stay stop. Very nice and hard to find. Price 19.99.
45. Used-Shimano British bottom bracket with a 113 mm spindle it looks great and I think it will fit those older doubles. As my memory has it, it will fit the older 105 or 600. It is priced at 24.99. picture
46. Used-Shimano Italian threaded cup setwith lock ring. Very clean no rust. Price 19.99.
47. Used-Shimano PD-M747 ATB mountain bike pedals in great shape no cleat. Price of only 39.99.picture
48. Used-Shimano PD-M525 ATB mountain bike pedals. No cleats but are still considered one of the best Shimano ever made and cheep. Priced at only 19.99.picture
49. Used-Shimano 600 AX front hub 36 hole in need of a repack. Price of only 9.99.picture
50. Used-Shimano EX 32 hole front hub no QR. Very hard to find short lived part that pioneered aerodynamics in the bike world. Priced at only 9.99.
51. NOS-Shimano Deore still in the box short cage rear derailleur. Pre index with little blue and teal logo. Price 39.99. picture
52. NOS-Shimano XT long lever brake lever set for canti's. Nice black with rubber cover for the adjusters in a tattered box. Price 39.99.
53. Used-Shimano RX100 rear hub 32 hole low flange QR style 130 mm with the 7 speed 13-23 cassette tossed in. Priced at 19.99picture
54. Used-Shimano C201 rear hub 32 hole low flange QR style 135 mm 8 speed cassett. Priced at 19.99picture
55. Used-Shimano FD-2202 lower end clamp-on road front derailleur for a 1 1/8" tube. Priced at 9.99. picture
56. Used-Shimano Tiagra 36 hole 9 speed cassette 130 mm rear no QR super clean hub. Priced at only 19.99 picture

SR

1. NOS-Sampson SAKAE clipless pedals still in it's beat box. These were lighter when look was the king and they fit the three hole road shoe and they would stop spinning when you got off of them, very cool, but never took off. We sold a few but this one I found under some box so the new price is 39.99 with cleats and all.picture
2. Used-SR SAKAE seat post 255 mm tall and 26.6 size. It has some discolor and scratches up the full body of the post but It should clean up very well. Did I say it was cheap at only 9.99. picture
3. Used-SR SAKAE Randnner road champion touring bar, 420 mm center to center bar with a 25.4 clamp size. This is a nice round touring. Price of only 19.99. picture
4. Used-SR SAKAE Randnner road champion touring bar, 420 mm center to center bar with a 25.4 clamp size. This is a nice round touring. Price of only 19.99. picture
5. Used-SR World Randonneur road bar, 410 mm center to center bar with a 25.4 clamp size. This round touring bar has very nice looking engravings on the sleeve. Price of only 9.99. picture
6. Used-SR 40 mm, 26.0 clamp size, 22.2 quill and a 72 degree. This stem is one of the shortest road stem ever made and it is in great shape. Priced at 29.99.picture
7. Used-SR 65 mm, 25.4 clamp size, .833 inch quill and a 72 degree. This stem fits some older Schwinns. Priced at 9.99.picture
8. NOS-SR SAKAE 80 mm, 25.4 clamp size, 22.2 quill and a 72 degree I can not believe I bought this new 25 years ago. Priced at 29.99.picture
9. Used-SR Stem 22.2 quill and only 60 mm reach, 25.4 clamp for the bars. I think one of the shorter ones and it has a taller then normal hight of 115 mm from the max insursion point to the top of the quill. Some scratches on the reach part but hard to get this size so I am listing it cheap at only 9.99.picture
10. Used-SR Stem .833 quill 80 mm reach, 25.4 clamp for the bars. Nice shape no bad marks just the mark the stem shifters made for the harder to find .833 quill size. Priced at 19.99. picture
11. Used-SR Custom 80 mm 22.2 quill 25.4 bar clamp. Very clean in great shape alloy stem. Price of 19.99.picture

Sugino

1. Used-Specialized Italian bottom bracket with a 120.5 spindle it looks perfect and I think it will fit those old style triples. As my memory has it Sugino made this bottom bracket that is satin finished. It works with some Suntour and some Campy cranks too. It is priced at 24.99. picture
2. Used-Specialized road crankset. 170 mm arms with 42x52 rings on 144 bolt circle arms yes I know same as old Campy. I was told this was forged by Sugino of Japan. A little scuffed up but looks okay and should work for years. Price of 39.99.picture
3. Used-Sugino Maxy crank. A cool lower end crank with 52 by 42 teeth with a 171 mm crank arm size. I never knew why they did 171 mm. It is priced at 19.99. picture
4. Used-Sugino 170 mm AT triple crank set 50 45 28 teeth rings with dust caps looks good for this upper end Sugino crank. Price is 79.99 picture
5. Used-Sugino Italian bottom bracket adjustable cup. As my memory has it Sugino made two levels of bottom bracket cups this is the higher of the two that is satin finished and has all those cool little holes and an alloy lock ring. It works with some Suntour spindles and some Campy too. It is priced at 14.99. picture
6. NOS-Sugino Italian bottom bracket cups. As my memory has it Sugino made two levels of bottom bracket cups this is the lower of the two that is chrome plated. They work with some Suntour spindles and some Campy too. They are priced at 29.99. picture
7. NOS-Sugino Mighty Tour British threaded bottom bracket 120 mm brand new spindle. Now the trick the adjustable cup is a very good condition used part but every thing else is brand new. If I remember right will work with the older Campagnolo triple too. It is priced at 49.99. picture
8. NOS-Sugino 75 cloth bar tape. This was the tape that would come on the first generation Fuji Titanium road bikes still in the box for only 19.99. picture
9. NOS-Sugino Italian bottom bracket adjustable cup. As my memory has it Sugino made two levels of bottom bracket cups this is the lower of the two that is chrome plated. They work with some Suntour spindles and some Campy too. It is priced at 14.99. picture
10. NOS-Sugino British threaded aluminum alloy lock rings. The go fast cheap thing we would all do years ago. Works on all the other brands out there Suntour, Campagnolo even Shimano. They are priced at 9.99 each. picture
11. NOS-Sugino Italian threaded steel lock ring. Just a standard replacement lock ring. Works on all the other brands out there Suntour, Campagnolo even Shimano. It is priced at 4.99. picture
12. NOS-Sugino British threaded fixed cup. Sugino made two levels of bottom brackets this was the better one. Sometimes works on most all the other brands out there Suntour, Campagnolo even Shimano. It is priced at 19.99. picture
13. NOS-Sugino French threaded cup and alloy lock ring set. Sugino made two levels of bottom brackets this was the better one. Sometimes works on most all the other brands out there Suntour, Campagnolo even Shimano. It is priced at 39.99. picture
14. NOS-Sugino 50 tooth 110 mm bolt circle all drilled out by the factory. Price 19.99.
15. NOS-Sugino MT Mighty Tour 118.7 mm long. Sugino made some of the best stuff out of Japan. They also pretty much copied Campy so you could a lot of there stuff in place of. It is priced at 29.99. picture
16. Used-Sugino MM-68 Mighty spindle 114 mm long. Sugino made some of the best stuff out of Japan. They also pretty much copied Campy so you could a lot of there stuff in place of. It is priced at 19.99. picture
17. NOS-Sugino MW-68 spindle 114 mm mighty spindle with bolts and bearings. Sugino made some of the best stuff out of Japan. They also pretty much copied Campy so you could a lot of there stuff in place of. It is priced at 29.99.
18. Used-Sugino MS-68 spindle 114 mm yes the better one that fits their top models. Price 19.99. picture
19. Used-Sugino Mighty Competition 50 tooth 151 bolt track chain ring fits Old Campagnolo and other cranks. Price 29.99. picture
20. Used-Sugino SP-K seatpost in a 27.2x200 mm size in good shape just scratches from the frame 2/3 of the way up should clean up nicely. Not seen very often but a nice older post. Priced at only 29.99.picture
21. Used-Sugino SP-KC seatpost in a 26.8x225 mm size. It is in pretty good shape scatches over most of the post but not bad and would clean up real nicely. I do not get these in very often and it is priced at 19.99.picture
22. Used-Sugino SP-H seatpost in a 27.0x200 mm size in very good shape. Not seen very often but a nice older post. Priced at only 29.99.picture

Suntour/Sunshine

1. Used-Shimano Suntour assorted clamps from the two big S companies of Japan all of then are as is. Price of only 5.99 each.picture
2. NOS-Specialized Pro model hub set not the standard one that you see all the time but the top pro model the best they ever made brand new you can tell by the better finish and the chrome nuts instead of black 36 hole low flange with QR. Priced at 129.99 picture
3. NOS-Specialized sealed bearing front hub 36 hole low flange bolt on. Priced at 39.99picture
4. NOS-Specialized sealed bearing front hub 36 hole low flange with QR. Priced at 39.99picture
5. NOS-Specialized sealed bearing hub set 28 hole low flange QR's 100 mm front and 126 mm rear hub. Very original needs nothing. Priced at 69.99picture
6. Used-Specialized low flange front hub 36 hole with a QR 100 mm sealed bearings. Price of only 29.99 picture
7. Used-Specialized low flange rear hub 36 hole with a Suntour QR 126 mm real sealed bearings. Price of only 19.99 picture
8. Used-Specialized sealed bearing front hub 36 hole low flange QR is a Shimano. Priced at 19.99picture
9. Used-Specialized sealed bearing rear hub 36 hole low flange QR great shape. Priced at 29.99picture
10. NOS-Specialized sealed bearing rear hub 40 hole low flange with QR 126 mm. Priced at 39.99picture
11. Used-Sunshine 36 hole high flange QR 124 mm British threaded rear hub. Very original needs a repacking of grease and would polish up very nicely. Priced at 9.99picture
12. NOS-Sunshine sealed bearing front hub 36 hole low flange QR but missing the QR Giromaster. Priced at 19.99picture
13. NOS-Suntour ring 52 tooth no pick ups on this vintage ring. Priced at 29.99 picture
14. NOS-Suntour In the bag friction bar end shifters we used to call them bar-cons and yes the stainless housing and cable are all in this still sealed bag. Price 79.99.
15. Used-Suntour BL Blue Line derailleur set. Brazed on shifters, clamp on front derailler (1 1/8") and long cage rear derailleur. All in good shape all working and all in need of a good cleaning. Price of 39.99. picture
16. Used-Suntour aluminum 26.8 seat post 230 mm from the clamp to the bottom of the post. Looks to have been cut down from a much longer mountain bike seat post. A few scratchs but over all nice and cheap at 9.99. picture
17. Used-Suntour Aero mount clamp on shifter for 1 1/8" down tube. Will work with may other brand shifters too. Priced at 19.99. picture
18. Used-Suntour cogs for a Winner or New Winner freewheel. Sorry but I do not remember what it came off of. They look great and the teeth are 13-15-17-20-26-32. Price of 19.99.picture
19. Used-Suntour Winner Pro 6 speed 13-14-15-16-17-19 British threaded low miles freewheel. Price of 39.99.picture
20. Used-Suntour Winner Pro 6 speed 13-14-15-16-17-18 British threaded low miles freewheel. Price of 39.99.picture
21. Used-Suntour Winner Pro ultra narrow 6 speed British threaded freewheel with a 13,14,15,16,17,19 tooth cogs with a notched body. The teeth look good as does the notches. Priced at 39.99 picture
22. Used-Suntour 6 speed freewheel 13-15-17-19-21-24 I thought these were called a perfect but I can not find that name on it. Priced at 29.99 picture
23. Used-Suntour rear hub 36 hole low flange QR style but missing the QR. Priced at 19.99 picture
24. Used-Suntour clamp on front derailleur as with all Suntour stuff it works great and cost very little. Priced to sell at 9.99 picture
25. Used-Suntour perfect 14-30 6 speed freewheel looks great and much better then what you can buy today. Price of 9.99.picture
26. Used-Suntour Pro Compe 14-18-22-28-34 5 speed freewheel. Gold in color and very low miles on the really wide ratio Japanese made freewheel. Much better made then the new one coming out of China and I do not think you can even get a 34 tooth anymore. Price of 19.99.picture
27. Used-Suntour perfect 14-32 5 speed freewheel looks great and much better then what you can buy today. Price of 9.99.picture
28. NOS-Suntour Winner 6 speed 13-14-15-16-17-19 British threaded new old stock freewheel. Price of 49.99.picture
29. Used-Suntour winner pro standard 6 speed British threaded freewheel with a 13,14,15,16,17,19 tooth cogs with a notched body. The teeth look good as does the notches. Priced at 39.99 picture
30. Used-Suntour non aerodynamic brake levers with the original slots in the levers. Good shape but the hoods and clamps are missing as you can see. Price of only 19.99.picture
31. Used-Suntour stem mounted power shifters also know as rachet type. The shorter model with the rubber tips looks good still works and is cheap at 9.99.picture
32. Used-Suntour power shifters. Clamp on shifters for 1 1/8" frames with that famous ratcheting shifting. I never got all the fuss over these but they were the hot thing back in the day. Price of 19.99.picture
33. Used-Suntour Mountech 1 1/8" clamp on front derailleur. Yes one of the early ones in very good shape no bad marks at all. Price of 19.99. picture
34. Used-Suntour ARX clamp-on front road derailleur for 1 1/8". Looks in good shape and only 14.99.picture
35. Used-Suntour Spirt clamp on front derailleur dirty but still works with 1 1/8" clamp size. Price 4.99.
36. Used-Suntour Superbe 170 mm crank set with 42 x 52 teeth dated J11 on the non drive side and A-2 on the drive side it does not have the dust caps it clean with only small scratches and small marks and has no cracks good threads. Priced at 159.99 picture
37. Used-Suntour spindle 68-3S CroMo with grease guard 125 mm with 52.2 mm between the bearing races. This is the one that you pump grease into the end under the bolt and the grease goes into the bearings. You can see the little holes that the grease comes out. It looks in great shape. Price of only 19.99.picture
38. Used-Suntour X-3000 long cage rear derailleur real dirty but it would clean up nice and works great. Price of 9.99.picture
39. Used Suntour Vx rear derailleur middle length cage it looks to be pretty clean and with low miles. Price of 29.99.pictures
40. Used-Schwinn-Approved front 36 hole high flange hub made by Suntour. With the QR and the tabs looks and feels great. Price of 19.99.pictures
41. Used-TruVativ Touro crank arms 175mm with 110 ring size and you even get the Power Spline British threaded bb with it all for only 19.99 picture

Other

1. Used-Bianchi low flange rear hub 32 hole with out the QR 135 mm so yes it is a mountain bike hub and will work with 8 speed. Price of only 19.99 picture
2. Used-Formula 100 mm front low flange hub 48 hole with nuts. Front for a tandem or freestyle bike still only 9.99 each picture
3. Used-Fuji British threaded cup set probably made by Tange. Nice and clean hard to get cups that are still clean with the original lock ring. It is priced at 19.99. picture
4. Used-Hsinlung road bar, 430 mm center to center bar with a 25.4 clamp size. This is a nice round racing bar that is single grooved for STI. Price of only 9.99. picture
5. Used-Kajita Japanese made bottom bracket British threads with a 112 mm spindle the spindle is marked 3HB. It is in great shape and looks to be well made but for the life of me I do not know this bb maker. It is priced at 19.99. picture
6. Used-Kalloy road stem 80 mm, 22.2 quill well weathered but looks okay and can be pollished up real nice. Priced at 9.99picture
7. Used-MTA stem 80 mm, 22.2 quill, 120 degree, Taiwan made alloy ATB stem with a 25.4 clamp size fits some road bars too. Price of only 9.99. picture
8. Used-NONAME front hub 36 hole low flange no QR 100 mm almost new. Priced at 9.99picture
9. Used-Sameness road stem 120 mm, 22.2 quill, 76 degree, very light cr-mo stem with a 26.0 clamp size. Price of only 9.99. picture
10. Used-Star hub front 36 hole high flange 97 mm alloy flanges and steel body bolt on. Priced at 9.99picture
11. Used-Tange British bottom bracket cups they look great and they will fit some of the other big brand spindles out there. It is priced at 9.99. picture
12. Used-Tien Hsin headset looks like some kind of Campagnolo NR copy with a 27.0 race size. Price 9.99.picture
13. Used-Velocity mountain stem 110 mm, 25.4 quill, 94 degree, very light cr-mo stem with a 25.4 clamp size. Price of only 9.99. picture

Spanish Components.

1. Used-Zeus 2001 rear bolt on caliper with two beat levers and no hoods about 47 to 57 mm reach. Price of only 39.99.picture
2. Used-Zeus French threads 35x1 bottom bracket with a 123 mm spindle. Market 123x53 what ever that 53 means I do not know. I found a few very small pits in the fixed cup and on the axle on the drive side that I showed. Normally I would toss anything with pits in it but I could not toss a French threaded Zeus bb I have never even seen one before. It is priced at 19.99. picture
3. Used-Zeus clamp on shifter set I do not see these very often. Priced at 29.99 picture
4. Used-Zeus track chain ring 50 teeth 151 mm bolt pattern lots of life left in these teeth. Priced at 49.99 picture

Swiss Components

1. Used-EDCO Competition French threaded Swiss made 116 mm bottom bracket with real sealed bearings. EDCO is not the biggest name in the bike world but still they made some great cranks and headsets and this bb is still so smooth. It is priced at 49.99. picture
2. NOS-Edco Competition In the box Italian threaded 115mm sealed bearing bb and yes will fit your old Campagnolo SR/NR cranks. Price 89.99.
3. NOS-Edco Competition In the box Italian threaded 120mm sealed bearing bb and yes will fit your old Campagnolo triple cranks. Price 89.99.picture
4. Used-Weinmann 500 black side pull brakes looks complete but needs some love. No QR and has bolt mounts. Price of only 9.99.picture
5. Used-Weinmann front 730 caliper about 48 to 66 mm reach. Has the original dried out old pads and the pivot bolt is a little bent and it is missing the pinch bolt. Very dirty can use a good cleaning. Price of only 9.99.picture
6. Used-Weinmann rear Schwinn approved caliper about 50 to 70 mm reach. Has the original dried out old pads with the pad keepers still on it. Very dirty can use a good cleaning. Price of only 9.99.picture
7. Used-Weinmann 500 calipers about 47 to 57 mm reach. Has the QR, wheel guides and barrel adjusters and uses 10 mm nuts to secure it to the bike. Very dirty can use a good cleaning. Price of only 19.99.picture
8. Used Wienmann 605 short reach, looks to be about 45 to 55 mm, brakes. Missing a pinch bolt abd pads what you see is all you get. Nice working brakes no bad marks and the qr's work too. It's claim to fame is the some nylon bushing between the arms to smooth it out. Priced at 19.99. picture
9. Used-Weinmann 610 calipers about 50 to 60 mm reach . Missing one nut on the rear. Not many miles just a little weathered looking. Price of only 29.99.picture
10. Used-Weinmann 610 front brake caliper with Scott/Mathauser W pads. I put a NOS wire in it after the picture. Price of only 19.99.picture
11. Used-Weinmann 610 rear brake caliper with original pads. About 50 to 60 mm reach. Price of only 19.99.picture
12. Used-Weinmann 610 front brake caliper with original pads. About 50 to 60 mm reach. No nuts or washer. Price of only 19.99.picture
13. Used-Weinmann rear 610 center pull brake. Old but correct pads, has the mounting hardware and straddle wire. Price of 9.99.picture
14. Used-Weinmann Raleigh rear 610 center pull brake with hanger and nut no washers and no pads other then that looks good. Priced at 9.99.picture
15. Used-Weinmann rear 610 center pull brake. Old but correct pads, has the hanger but doesn't have the mounting hardware. Price of 9.99.picture
16. Used-Weinmann front 610 center pull brake. Old but correct pads, has the hanger and has the mounting hardware. Price of 9.99.picture
17. Used-Weinmann front 610 center pull brake. Wrong pads but has the hanger and has the mounting hardware. Price of 9.99.picture
18. Used-Weinmann rear 750 center pull brake. Wrong pads and no hanger but does have the mounting hardware. Price of 9.99.picture
19. Used-Weinmann brake levers with cool small holes like campy SR with a 24 mm clamp for alloy bars no bad marks could be pollashed up real nice and then add gum hoods. Price of 9.99.picture
20. Used-Weinmann brake levers with cool qr built in 23.5 clamp and cut up hoods at no extra charge. Price of only 9.99.picture
21. Used-Weimann Type 810 medium reach side pull front brake. Mounts with a 10 mm nut very clean with about 65 to 80 mm reach. This one says made in Western Germany so cool. Price of 9.99.picture

Other parts.

1. NOS-Baleno shorts made in the USA size small with leg grippers and very shinny look to it. Price at only 39.99
2. NOS-Schnaubelt shorts made in the USA size small with leg grippers. Price at only 39.99
3. NOS-Schnaubelt shorts made in the USA size X-Large with leg grippers. Price at only 39.99
4. USED-Schwinn Grey ghost pedals. The one and only correct pedals for that 1970 Schwinn Stingray Chopper you have. White reflectors with no cracks and low miles. Price 99.99.pictures
5. NOS-Wonder Light Frence made leg or arm safty light. Still in the tattered box. Price 4.99.